Basic Performance upgrade

4gbanger

1,500 RPM
Jun 26, 2013
1,958
386
683
Johor/ShahAlam
if ur aiming for power at 3000rpm above, u should have rally spec camshaft.. torque will increase alot, slowbox will kaput earlier mah.. heheh
 

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
I am aiming for 2.4L kit. There's always a saying, there's no replacement for displacement. :)
 

kaninbu

500 RPM
Senior Member
Thread starter
Dec 2, 2008
669
104
1,543
KL
I am aiming for 2.4L kit. There's always a saying, there's no replacement for displacement. :)
if in city i will go for bearing turbos...more on highway i go for displacement

---------- Post added at 07:04 PM ---------- 6 hour anti-bump limit - Previous post was at 07:03 PM ----------

anyone here did a STi pink injector into airtrek? is it pnp?
yes...is pnp
 

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
That's what I heard. Our ATR with TD05 and tuning need not reach 550cc. 490-500 is more than enough.
 

Random Post Every 5 Minutes

Hi guys,

Just a simple DIY on how to replace this oil seal (for 4G93T engine). Its location is shown below.


Figure 1 : All the components. [1] Oil Filter, [6] 24mm Nut, [7] Oil Cooler, [N] Oil Seal to be replaced


Things you need :
1) All basic tools (oil filter remover, pliers, etc)
2) 24mm ratchet socket (a deep one)
3)...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience