Rm8k Wira & Jazz GK5 ownership experience-A long way to go

[KHNG940413]

my friend start to persuade me to switch to a mmc.
Lmaoooo

 

[vr2turbo]

Some times I think carburetor car is better, for longetivity that is....my old proton saga never gave these kinds of problems, sure the idling wasnt the most consistent, but it will always run.

Everything manual.....lol
My earlier cars were all Carb, even played with Weber......haha

 

[Izso]

The 1st one rosak already. When my car 1st time engine dead & plug the obd2 port we saw the crank sensor issue. After replacing it everything went fine.
After 2 day then the car went dead agn.

You should find out what happened to the second sensor to cause it to die. Sounds like short or physical damage if you ask me. If it's a short then GG..... if it's physical damage you going off-road a lot ah?

my friend start to persuade me to switch to a mmc.
Lmaoooo

Believe me MMC has it's own set of problems. MMC is also more "dumber" so needs a lot more input from you to make it work. Then there's the dreaded throttle body screw....... hahahaha

 

[sanekit]

For me I had




For me I had chg
Air flow
Can sensor
Crank sensor x2
Oxygen sensor
The nightmare has come to me. Hahahahhaaha
What I afraid the most is those wiring & sensor thingy rosakI really don't have a clue to fix it.

swap to MMC 4G92 DOHC. hahahaha

 

[sanekit]

Believe me MMC has it's own set of problems. MMC is also more "dumber" so needs a lot more input from you to make it work. Then there's the dreaded throttle body screw....... hahahaha

MMC more powwah. #iHeartMMC

 

[parakey]

Believe me MMC has it's own set of problems. MMC is also more "dumber" so needs a lot more input from you to make it work. Then there's the dreaded throttle body screw....... hahahaha

Tbh, I dont see how VDO is smarter when all it's sensors left, right and center breaks down so often

 

[KHNG940413]

You should find out what happened to the second sensor to cause it to die. Sounds like short or physical damage if you ask me. If it's a short then GG..... if it's physical damage you going off-road a lot ah?



Believe me MMC has it's own set of problems. MMC is also more "dumber" so needs a lot more input from you to make it work. Then there's the dreaded throttle body screw....... hahahaha

My working environment is quite....bad
Construction site as you can think.
Got dust,sand,mud,water pond
Gravel road,cement road, half half off road to be honest. Hahahahahahhaa

 

[KHNG940413]

swap to MMC 4G92 DOHC. hahahaha

Actually my friend wanna sell his 4g92 sohc engine.
But juz engine only abit susah.
And also the crank need to adjust something.

 

[KHNG940413]

Any sifu know is there anywhere selling those wira bottom engine cover? Like thise conti car have at their bottom of car one.

 

[gunnerzz]

Any sifu know is there anywhere selling those wira bottom engine cover? Like thise conti car have at their bottom of car one.

Very2 long time ago when my hair are all still black, there is one company whom makes and sell this.Its a local brand. However i dont recall the name brand or if they are still around. Maybe other member with more white hair than me can shed sone light.

eh....
few second of using the power of internet

 

[stupidcar]

Any sifu know is there anywhere selling those wira bottom engine cover? Like thise conti car have at their bottom of car one.

Why would you want that? U cant see leaks. Accessibility harder also

 

[KHNG940413]

Why would you want that? U cant see leaks. Accessibility harder also

After changing my cam & crank sensor the 2nd time this year. I was thinking is it because my working area those stone,sand,mud thing cause this.

If yes,if I install this will it extend the life span of my cam & crank sensor and other part.

Juz my thinking only lah

 

[parakey]

After changing my cam & crank sensor the 2nd time this year. I was thinking is it because my working area those stone,sand,mud thing cause this.

If yes,if I install this will it extend the life span of my cam & crank sensor and other part.

Juz my thinking only lah

Was the sensor that dirty?

 

[KHNG940413]

Was the sensor that dirty?

Abit dirty at the sensor side bottom. Although After cleaning still cannot use la~
My car always running at those sand rock road. Alot of sand going inside the engine bay.

 

[KHNG940413]

What I saw on FB is like this.

 

[parakey]

If you close the bottom, where's all the heat that the engine produces going to?

 

[KHNG940413]

If you close the bottom, where's all the heat that the engine produces going to?

If you see closely the pic,they have a vent in & out.
But not sure can it really ventilate the heat out.

 

[gunnerzz]

If you close the bottom, where's all the heat that the engine produces going to?

Should not be an issue. My old pajero comes with a metal sump guard.
Then again the engine bay is very spacious.

 

[alcyon]

After changing my cam & crank sensor the 2nd time this year. I was thinking is it because my working area those stone,sand,mud thing cause this.

If yes,if I install this will it extend the life span of my cam & crank sensor and other part.

Juz my thinking only lah

Is your wira lowered ?

 

[sanekit]

Actually my friend wanna sell his 4g92 sohc engine.
But juz engine only abit susah.
And also the crank need to adjust something.

what crank adjustment? haha. buy complete with wiring, ac and power steering system. easy to swap if complete.