Need advise about my mirage turbo setup..

kambeng758x

Junior Member
Jul 20, 2015
11
0
1
41
Kulim kedah
could i bring up this thread.:proud:..long time not sembang about mirage..i have wira with mirage turbo enjin,but already change the block to vr4 from bottom to top..right now only wiring,trotel,ecu,air flow,turbo td04 mirage ( td04 11b i think ), gearbox only wira 1.6 huhu..then only upgrade the injector from vr4...could anybody suggest the best way for me to upgrade from those condition..some say just upgarade the ecu & air flow vr4..and some say upgrade the turbo to td05 ( any td05 evo1,2,3,vr4rs or td05 18g )...hope got respon from all sifus:adore::adore::adore::adore::adore::adore::adore::adore:
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
could i bring up this thread.:proud:..long time not sembang about mirage..i have wira with mirage turbo enjin,but already change the block to vr4 from bottom to top..right now only wiring,trotel,ecu,air flow,turbo td04 mirage ( td04 11b i think ), gearbox only wira 1.6 huhu..then only upgrade the injector from vr4...could anybody suggest the best way for me to upgrade from those condition..some say just upgarade the ecu & air flow vr4..and some say upgrade the turbo to td05 ( any td05 evo1,2,3,vr4rs or td05 18g )...hope got respon from all sifus:adore::adore::adore::adore::adore::adore::adore::adore:
Mine is standard VR4, not RS but already have TD05, or halfcut owner in Japan already changed?:hmmmm:

You can also boost higher for better power but many things to do....:driver:
 

kambeng758x

Junior Member
Jul 20, 2015
11
0
1
41
Kulim kedah
Ooo..vr4 already?hihihi..very different from me lah..hihi..me only mirage 61t lah...just vr4 wannabe..boosting sometimes up to 1.0 bar only using tulang ikan..could u suggest any idea?right now im wonder rather i change the turbo 1st or chage the ecu and air flow to vr4?
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
U also the expert la..huhuhu..just wonder either to change the turbo or ecu and airflow
Not expert. Mine as mentioned standard only no further mod.
But for your mod, installing bigger turbo need to re-tune and/or add injector or change bigger injector as you cannot allow it to run too lean. Probably ECU re-tune also, or re-chip etc to add fuel. That is why I mentioned need expert....:smokin::driver:
 

kambeng758x

Junior Member
Jul 20, 2015
11
0
1
41
Kulim kedah
Everyday u on9 lah vr2turbo..me so happy lah.at least,somebody reply to my post.i know and feel u are also expert lah..looking at ur name also know lah..hihi...actually i think wanna go for turbo 1st..td05 better no need big modified. At least plug and play to my mirage manifold.. For Garret also best,but i think need extra modi..fuhhh so hard lah play turbo...aiyoo
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Of course direct fit always better, no need mod it in. You mentioned change ECU, what about your wiring harness? Now is Mirage wiring?, will it run VR4 ECU?
 

kambeng758x

Junior Member
Jul 20, 2015
11
0
1
41
Kulim kedah
If you read previous post from otai2,they said ecu and air flow from vr4 just plug and play..all the socket same lah kot..just the electronic components inside la the different..kick me if im wrong..hihi:adore::adore:..so x tahan lah always kena tapau with GSR turbo..haiyo..
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
If you read previous post from otai2,they said ecu and air flow from vr4 just plug and play..all the socket same lah kot..just the electronic components inside la the different..kick me if im wrong..hihi:adore::adore:..so x tahan lah always kena tapau with GSR turbo..haiyo..
That not sure, but can you try before buying? If not, buy already don't work well then how?:smokin:
 

kambeng758x

Junior Member
Jul 20, 2015
11
0
1
41
Kulim kedah
Wahh..me already scare lah..luckily not buy yet..if not match ,then rugilah..to sell back take time lah..aiyooo..i think better try ecu and air flow from friend 1st..very good input from you la vr2turbo..
 

Random Post Every 5 Minutes

hi guys!

i've realised that some of you guys are not in KL, but you wanna buy TiTAN's for your 'baby'.


not a problem now,
i can deliver AND come over to supervise installation of your new set of TiTAN's.
(same like JUN, TopSecret)

possible locations:

Penang
Ipoh
Johor Bahru
Melaka
Seremban

this are the places that i can travel to and deliver to you.
installation fees will be paid by you to your technically competent workshop.

hope this helps!!
now you don't have to travel to KL to fit...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience