HELP! Waja High Beam cannot off!

richnet

Junior Member
Senior Member
Dec 2, 2009
21
2
1,503
Penang/PJ/KL
Hi guys,
I'm driving a Waja Campro 2006.
Last night, my headlamp's high beam just turned on automatically.
and no matter how i try to turn it off, by pulling the high-beam trigger, it doesn't shut it off.
it just suddenly on it by itself.

anyone faced such problem before?

any idea what's going on?
 

richnet

Junior Member
Senior Member
Thread starter
Dec 2, 2009
21
2
1,503
Penang/PJ/KL
bulb is not blown yet until last night, when i on and off the light non-stop, then suddenly one side not functioning, but the high beam still on... :(

i am thinking of temporary solution, which i just remove the high beam bulbs and let only the normal projector lamps lights, like that even with the high beam function on, it's still not on high beam mode from outside. but a bit dangerous lo, i cannot beam people...
 

NeuroOne

WFH
Senior Member
Sep 11, 2006
2,074
181
1,663
Putrajaya
i've experienced before (not Waja) that if the normal beam bulb blown, it will automatically ON the high beam to compensate the blown normal beam bulb.

are both your normal beam bulb ok? not blown?
 

richnet

Junior Member
Senior Member
Thread starter
Dec 2, 2009
21
2
1,503
Penang/PJ/KL
when both are on, all bulbs are normal. no bulb is blown. so, i find it weird.

i thought the relay is at fault, i tried replacing the relays, it's still the same... aargghhhh
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
like wat neurone said...the bulb has 2 filaments, 1 normal, 1 high beam.....the normal filament might been blown....
u only could notice it when u remove the bulb.
 

richnet

Junior Member
Senior Member
Thread starter
Dec 2, 2009
21
2
1,503
Penang/PJ/KL
waja is using H1 bulbs, which only got single filament inside.

normal + high beam = total 4 bulbs
 

richnet

Junior Member
Senior Member
Thread starter
Dec 2, 2009
21
2
1,503
Penang/PJ/KL
sigh... :(
the only thing I can thought of is the cable overheating and short-ed...
but then, I have no idea how to troubleshoot it myself now... well, can.. but it'll gonna take quite sometime
 

richnet

Junior Member
Senior Member
Thread starter
Dec 2, 2009
21
2
1,503
Penang/PJ/KL
aiya.. itu reliability issue... but this one macam weird weird eh... after 6 years baru ini macam...
 

Random Post Every 5 Minutes

Hi all i was reading here before, but cannot find the topic anymore...
It was about wiring a 12v 30a relay to the existing coil and supplying direct power from the battery... thats all i can remember..... any sifu out there have any idea of this and maybe a post on the diagram will help...
It said to be able to supply a better spark to the plugs for more complete combustion

Thx:regular_smile:
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience