Gearbox 4g92p failing. HELP!

fadin_remorse

Known Member
Senior Member
May 28, 2008
94
4
1,508
The gears are not engaging during cold start esp D,2,1. Takes 10 minutes before they warm up and work. Other than that the other gears are fine. Shifting of the other gears are also a bit more jerkier than before.
My options are
1.Overhaul the gearbox by a gearbox specialist (i am KL based) unknown of any good specialist.
2.Get a half cut Japanese 4g92 gearbox instead from a trust able source

Which option is cheaper/reliable? My engine has clocked in 181k
Thanks!:wavey:
 
Last edited:

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
change to manual :cost::rm2k (parts only not including installation) *

overhaul the GB :cost::rm800 (quality/warranty not sure 2place in kl i know u can send it)*

choose halfcut gb: cost::rm1.2k-rm1.6k (value varies if trade-in old GB or not)*


this is from my previous experience cost i also just replace my GB earlier this yer....my car clocking almost 200k km mileage now :adore:
 

xtremeleo

3,000 RPM
Senior Member
Oct 18, 2005
3,247
464
5,183
id rather overhaul the gb jer, at least u know u r gonna everything new inside there..
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
morning bro, thats completely out of my options gosh...... hows ur car?
tq bro. car is fine. the workshop already close down haha....

---------- Post added at 12:39 PM ---------- 6 hour anti-bump limit - Previous post was at 12:35 PM ----------

id rather overhaul the gb jer, at least u know u r gonna everything new inside there..
i agree wid u sir!! :biggrin:
 

fadin_remorse

Known Member
Senior Member
Thread starter
May 28, 2008
94
4
1,508
id rather overhaul the gb jer, at least u know u r gonna everything new inside there..
yeah bro that was my main idea, just need a location for a trusted workshop around KL. Do you know of any?

---------- Post added at 12:52 PM ---------- 6 hour anti-bump limit - Previous post was at 12:51 PM ----------

change to manual :cost::rm2k (parts only not including installation) *
overhaul the GB :cost::rm800 (quality/warranty not sure 2place in kl i know u can send it)*
choose halfcut gb: cost::rm1.2k-rm1.6k (value varies if trade-in old GB or not)*
this is from my previous experience cost i also just replace my GB earlier this yer....my car clocking almost 200k km mileage now :adore:
Thanks for ur input bro still contemplating. Halfcut gb so exp meh?

---------- Post added at 12:54 PM ---------- 6 hour anti-bump limit - Previous post was at 12:52 PM ----------

tq bro. car is fine. the workshop already close down haha....

See bro you agree what goes around comes around :driver: They deserved it
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
fadin : u try to check out the thread 'car shops & services'
there are bout 2 shops that does gearbox overhauling.....
should be ok cos they are forumers here if anything goes wrong can shoot them later haha...
'IF' only k. if they done a good job then can praise them.
 

fadin_remorse

Known Member
Senior Member
Thread starter
May 28, 2008
94
4
1,508
fadin : u try to check out the thread 'car shops & services'
there are bout 2 shops that does gearbox overhauling.....
should be ok cos they are forumers here if anything goes wrong can shoot them later haha...
'IF' only k. if they done a good job then can praise them.
Thank you boss i will search it out, appreciate it :)
 

Shinjite

500 RPM
Senior Member
Feb 27, 2006
864
120
1,543
Klang
Better overhaul the GB
Peace of mind knowing all new parts will be in it instead of a used 1

---------- Post added at 04:10 PM ---------- 6 hour anti-bump limit - Previous post was at 04:10 PM ----------

Better overhaul the GB
Peace of mind knowing all new parts will be in it instead of a used 1
 

fadin_remorse

Known Member
Senior Member
Thread starter
May 28, 2008
94
4
1,508
Better overhaul the GB
Peace of mind knowing all new parts will be in it instead of a used 1

---------- Post added at 04:10 PM ---------- 6 hour anti-bump limit - Previous post was at 04:10 PM ----------

Better overhaul the GB
Peace of mind knowing all new parts will be in it instead of a used 1
yeah true bro checking up on that:driver:
 

kumar22mostwanted

1,500 RPM
Senior Member
Jan 9, 2010
1,562
152
1,663
HELL!!!
about the gear's not being able to engage at a cold start
im pretty sure that is a clutch pump issue as i also faced it not too long ago
about the car jerking when engaging gears i tink its a clucth prob
i would prefer overhaul coz its cheaper and more reliable
 

fadin_remorse

Known Member
Senior Member
Thread starter
May 28, 2008
94
4
1,508
about the gear's not being able to engage at a cold start
im pretty sure that is a clutch pump issue as i also faced it not too long ago
about the car jerking when engaging gears i tink its a clucth prob
i would prefer overhaul coz its cheaper and more reliable
year bro kumar, do you know any gearbox specialists in kl area?
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
u could try ag motorsports in pandan indah kl,
or seach for lan_eterna. he is a forumer here.

---------- Post added at 03:47 PM ---------- 6 hour anti-bump limit - Previous post was at 03:47 PM ----------

i modified my gearbox there as well.
 

Random Post Every 5 Minutes

I'm using a wira 1.5 carburator engine........can i switch my standard engine to turbo engine?.......plz any sifu tell me! izzit possible?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience