Gearbox 4g92p failing. HELP!

kumar22mostwanted

1,500 RPM
Senior Member
Jan 9, 2010
1,562
152
1,663
HELL!!!
u could try ag motorsports in pandan indah kl,
or seach for lan_eterna. he is a forumer here.

---------- Post added at 03:47 PM ---------- 6 hour anti-bump limit - Previous post was at 03:47 PM ----------

i modified my gearbox there as well.
ooo
what did u do for ur gb there bro???
 

fadin_remorse

Known Member
Senior Member
Thread starter
May 28, 2008
94
4
1,508
u could try ag motorsports in pandan indah kl,
or seach for lan_eterna. he is a forumer here.

---------- Post added at 03:47 PM ---------- 6 hour anti-bump limit - Previous post was at 03:47 PM ----------

i modified my gearbox there as well.
Yours is a manual right bro? well i found this http://www.hi-techrecond.com.my/services.htm
Called em up and they said Overhaul is bout 1.4k it is on the high side slightly but what do u guys think?
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
kumar,
my original 6a12tt manual gearbox code 332 (4wd locked 2wd) had failed on me, it was a faulty hub. therefore i decided to upgrade the gearbox by using 4g63t internals.......pick up much more better but top end not as good as my previous gearbox.

fadin,
yeah, heard of hi tech recond, they are based in sg penchala rite? i used to pass there everyday on my way to work, but i saw lotsa conti cars there....rm1.4k ah....i think its not worth it.

y not buy the overhaul kit yourself, then pasang at the gearbox specialist shop....at least u could save a couple of $$$ there......try asking some workshop owners here for advice.
 

kumar22mostwanted

1,500 RPM
Senior Member
Jan 9, 2010
1,562
152
1,663
HELL!!!
kumar,
my original 6a12tt manual gearbox code 332 (4wd locked 2wd) had failed on me, it was a faulty hub. therefore i decided to upgrade the gearbox by using 4g63t internals.......pick up much more better but top end not as good as my previous gearbox.

fadin,
yeah, heard of hi tech recond, they are based in sg penchala rite? i used to pass there everyday on my way to work, but i saw lotsa conti cars there....rm1.4k ah....i think its not worth it.

y not buy the overhaul kit yourself, then pasang at the gearbox specialist shop....at least u could save a couple of $$$ there......try asking some workshop owners here for advice.
i tink that has to do with the gear ratios
which evo gearbox internals did u use???
 

fadin_remorse

Known Member
Senior Member
Thread starter
May 28, 2008
94
4
1,508
kumar,
my original 6a12tt manual gearbox code 332 (4wd locked 2wd) had failed on me, it was a faulty hub. therefore i decided to upgrade the gearbox by using 4g63t internals.......pick up much more better but top end not as good as my previous gearbox.

fadin,
yeah, heard of hi tech recond, they are based in sg penchala rite? i used to pass there everyday on my way to work, but i saw lotsa conti cars there....rm1.4k ah....i think its not worth it.

y not buy the overhaul kit yourself, then pasang at the gearbox specialist shop....at least u could save a couple of $$$ there......try asking some workshop owners here for advice.
Ok bro will check that out :burnout:
 

Random Post Every 5 Minutes

I just installed a Autogauge water temp gauge on my Iswara to replace the old 1(die already)...

then after some normal driving... i found that the needle is pointing between 90c n 100c...

is this optimum temprerature?

i scared wait rev some more my engine has to "enter factory"..

thx
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience