Hi guys, was trying to get the serpentine belt on today (Dayco 6PK1795) This belt was new and had run for a few hours on the engine before i had to strip the engine again, came off easily enough. but today for some crazy reason its not going back on wrap it around the pulleys and idlers as per the evo manual, but its shorter by a considerable margin.
I have changed the crankshaft but still use the original crank pulley, other item changed is the small idler pulley that comes between the crank and ac pump. all other pulleys and idlers reused.
I am now thinking of getting a longer drive belt which i cannot get get under any mitsubishi oem size. What i would like to know is has anyone used a serpentine belt longer than 1795mm? If yes what size?
Please advise.
I have changed the crankshaft but still use the original crank pulley, other item changed is the small idler pulley that comes between the crank and ac pump. all other pulleys and idlers reused.
I am now thinking of getting a longer drive belt which i cannot get get under any mitsubishi oem size. What i would like to know is has anyone used a serpentine belt longer than 1795mm? If yes what size?
Please advise.