Any sifus here can recommend me a good workshop with good in tuning engine ? thx alot

[darrengoh89]

My Satria 1.3 fuel inject need to send for good tuning ...Your reply is very much appreciated ~....

 

[tigger5251]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

tuning a stock satria ? are u using piggyback ?

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

ermm ..dont really know how to describe it ...but as i know ..muz use computer and tune 1 ..not manual tune 1 ...

 

[AD_EG]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

bro...

you are using stock 1.3 ...what year?

are you referring to the PDT2000? for siemens ecu? if you are...then only proton service centre can do that....

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

ermm ...mine is year 2002 ......

 

[AD_EG]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

ok....who told you your car need to retune?

your car should be the siemens ECU bro.

So the person who told you need to re-tune is most likely referring to use the PDT2000 device which is normally only available at the proton service center.Just got to any of it...or you can ask others which is the best near your area,but i think it will all be the same...the charge might be between rm30-rm80 ...see your luck.where are you from?

i once paid rm30 in klang...the guy did it in a "hush-hush" manner...but some other members have paid up to rm80 on this....

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

lol ..i see ...coz my top speed reach 140 kmh only ..i asked alot of zth members about this problem ..they also suggest me go for checkup and tuning ...

 

[gsrTurbo9166]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

hi darren,

wat hv u done to ur car? any mods? b4 the mods, wat is ur top speed?
try to figure out wat had u done to ur car that cause ur top speed drop.
as far as i know, siemens ecu does not hv the ability for u to tune using a piggyback.

 

[tigger5251]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

I think proton using siemens, better just upgrade engine internals for performance coz the ecu learns differently n resets when the key is off.

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

thx for the reply gsr and tiger ...no mod is made ...its all in stock .....i was wondering how come other's 1.3 satria even same year than mine also can achieve the top speed more than mine ..is there any way to increase the top speed ? i've asked a technician ..he asked me to change gearbox ..use 1.6 gearbox ...change cluth pad ..clutch plate ...and clutch pump ...flywheel use back as he claimed that can be modified back to suit the clutch set ...but this way is kinda too expensive..all together including labour is almost 1.8k ..i'm not hoping to achieve the top speed till 180 - 190 ...juz more than 140 ...like 160 or more abit will do ...hope you guys can give some advise what to do ...thanks alot ...

 

[AD_EG]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

to achieve 160km/h shouldn't be a problem normally..

you never could achieve more then 140km/h all the time? or just recently?

siemens ecu cant use piggyback...pointless.....dont upgrade anything 1st....go to the proton service centre ...ask them to use the PDT2000 to check your ecu....they can detect there if anything is messed up...i have experienced this before....this is just my honest opinion....up to you in the end of the day.

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

not recently ..is all this while ...from the day i drove the car till now lol ..160 kmh ..can ..when there's a downhill road ...lol ...hmm ...i see ..thx for your opinion bro AD ...only proton service have the pdt2000 machine ? and i thought proton service already not gonna accept those old model proton car for service already ?

 

[AD_EG]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

not recently ..is all this while ...from the day i drove the car till now lol ..160 kmh ..can ..when there's a downhill road ...lol ...hmm ...i see ..thx for your opinion bro AD ...only proton service have the pdt2000 machine ? and i thought proton service already not gonna accept those old model proton car for service already ?

got one sifu in seri kembangan....he is very experienced in the siemens ecu...i think he bought the device PDT2000...i already pm him to reply to this thread to help you...he got a shop near that area....

if not have to go to proton service center...they will accept your car...just tell them to use the PDT2000 to check your ecu....they will do for you...ask them how much 1st...try to nego with the guy...

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

sri kembangan far lol ...i think i will take it to proton service ...but around how much proton will quote me

 

[AD_EG]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

like i mentioned above..can range from rm30-rm80..

try to nego with the guy....

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

ohh ..30-80 izzit ..then i can afford to pay ..i thought 200+ and above ...seems you said the machine only proton service got ...lol ...thx alot for your information bro AD ...really very appreciate it ....then i would like to ask you another question ..whats the best piping diameter size for my 1.3 fuel inject ? 1.7" or stay stock ? and whats the stock piping size ? 1.5" ?

 

[freeman1314]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

Frankly Proton SC charge differently at different branches. Some get as low as RM30 some get as high at RM80 as told by AD_EG , so juz ask a quote from them ans try to bargain see lo.. wonder why their price is not all the same though they all are Proton SC.

 

[AD_EG]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

ohh ..30-80 izzit ..then i can afford to pay ..i thought 200+ and above ...seems you said the machine only proton service got ...lol ...thx alot for your information bro AD ...really very appreciate it ....then i would like to ask you another question ..whats the best piping diameter size for my 1.3 fuel inject ? 1.7" or stay stock ? and whats the stock piping size ? 1.5" ?

1.7"

not sure whats the stock size....read somewhere it might be 1.5" or 1.6" cant remember.

 

[gsrTurbo9166]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

go for 1.7" and change ur extractor as well
either to 4-2-1 or 4-1, depends on which suit u better

 

[darrengoh89]

Re: Any sifus here can recommend me a good workshop with good in tuning engine ? thx

hi gsr ...actually my stock extractor is already 4-1 ...or izzit i should go for those branded extractor ?afterall if i change i will still go for 4-1 ...coz my engine is only 1.3 ..i find out that 4-1 is suitable for 1.3 ...more pick up ...