water injection for turbo usually use the pressurize air (boost) from turbo to "push" water from sealed water container (with controlled vent) to inlet pipe after air filter or turbo.
appropriate nozzle to make small mist of water droplets required to make sure it "blend" with intake air.
water injection benefit from colder air intake temperature and thus some power increment can be felt.
o2 sensor will read the air after burned with fuel in combustion chamber n send the signal to ecu, then ecu read it whether its rich or lean.after that ecu tells the injector o inject the correct amount of petrol rite to make it stoich rite?
i heard if using emanage we can set the proper fuel on certain rpm during the dyno test.so my question is if the o2 sensor help ecu to get the correct reading to inject correct fuel amount, why is it we need to tune up the emanage...
Ask a question, start a discussion or post something for sale!