Convert whole body to carbon fibre, where can it be done?

[-NA->]

Or to any equally lightweight material...

Let's say hatch-back car, Satria for instance....

I know it's gonna cost a bomb... but how much eh?

Thanks in advance :_:

 

[MaNofWaR]

bro...
price is one issue...another is are there any company willing to do it? at a price which is logical...
but i've seen one bmw e46 in an american magazine which has the whole interior carbon fibre. no more plastics, pu or vinyl interior. except the seats.
the owner is a carbon fetish i guess

just my 2 cents.

 

[SkYwAlKeR]

dreamcarsasia autoshow 2005... the lambo murcielago is full carbon fibre bodykit...

erm, sorry, dont know where got do full cf bodykit and how much it is... hehe...

 

[nitrus]

i wonder wat will happen during an accident with full CF body..?

 

[civic_rs]

berkecai la... what else? later can play puzzle ma... muahahaha

 

[TEAMADVAN]

did u guys see a GT or a F1 car berkecai after accident?
me nope....
it depends on wat kinda material u use...
if carbon will crack and lost the part that u crack....
but GT car / F1 use 3 layer of carbon...while street car use one layer of carbona nd two layer of fibre...that also cost u about 40K+.....
if u wan, u can PM me...monster garage ipoh can do it...:_:

 

[Dino@Casper]

F1 it does break into pieces wei... haha everytime after accdeint got alot of debri on the race track..

 

[prodigy]

If you've been watching F1 long enough, you'd realise when a car crashes, you see lots of carbon fibre scrapnels on the track. Thats the reason why they employ the safety car to come out and regulate the car speed so that the track cleaners can remove all debris that might be sharp enough to puncture a tyre of a F1 car.
Carbon fibre are extremely strong but is also very brittle. They break into pieces at impact. But of coz that depends on what sort of impact.

 

[SkYwAlKeR]

did u guys see a GT or a F1 car berkecai after accident?
me nope....
it depends on wat kinda material u use...
if carbon will crack and lost the part that u crack....
but GT car / F1 use 3 layer of carbon...while street car use one layer of carbona nd two layer of fibre...that also cost u about 40K+.....
if u wan, u can PM me...monster garage ipoh can do it...:_:

wah... monster garage can do so many things arr??... i wonder can ask them opinions how to tune my 4g13 iswara... haha... i see they all tune sports cars only....

 

[TEAMADVAN]

of cos small pieces got lar....sumtimes uneven road also cause their front generator breaks also....but then. those are "breaks/broken" which can be repair...not "ONCE HIT, BERKECAI KECAI".....to me, this words means sumting like left the steering wheel hold by driver after accident.....hahahaha......:_:

 

[ken yeang]

I think Cf body is posible. however, once the car/part of the car involved in accident, then parts msut be replaced (NOT KETUK BALIK, or go shopping at frenly kreta potong for second hand replacement).

If the initial cost of CF body already make your wallet bleeding, then replacing damaged CF part is going to kill you....

 

[ace79]

jeez...you really got a lot of money to blow ka? a good quality CF front bonnet alone ( like Varis, for example ) will cost you about RM 2.4k++. That's just the front bonnet, what about front lip, rear hatch and rear spoiler, it'll be at least RM5k++ to RM 6k++. if it's for daily use / weekend car, tak payah la. if it's for those silly autoshow events, then just go buy plenty of large - sized CF stickers of a good grade, then tampal le the whole car. it's stupid to have so much money to blow, and to spend 'em on the outskirts of the car, when it's better spent for engine / brakes / chassis.

 

[ace79]

... and there's not a lot of large - sized ovens around Malaysia that can help form CF parts too!

 

[whatdamn]

a good example of a full bodied cf track car was the evo 8 built by hks that nobuteru taniguchi crashed during a test lap if i'm not mistaken.

at high speed collisions, the cf will definitely crack and leave debris all over the place but at say a collision of 30-60 maybe even 90 km/h would only cause the cf (say the bonnet) to flex a certain amount and then return back to it's initial size and shape.

 

[ace79]

a good example of a full bodied cf track car was the evo 8 built by hks that nobuteru taniguchi crashed during a test lap if i'm not mistaken.

at high speed collisions, the cf will definitely crack and leave debris all over the place but at say a collision of 30-60 maybe even 90 km/h would only cause the cf (say the bonnet) to flex a certain amount and then return back to it's initial size and shape.

N.Taniguchi ( whose face is so similar to Max Orido! ) crashed the car at Tsukuba during a 1 Lap Time Attack session, it was 56 or 57 seconds, I forgot oledi liao. I would say that most of the CF bonnets sold here ( or the ones that can be ordered, like Spoon's and Varis ) can survive accidents only up to 30 kph ( on the safe side lah ), above that speed, it will crack at certain parts of the weave ( depends whether the bonnet have a proper full frame beneath, like Spoon's, and that's why u don't need to use bonnet clips with Spoon CF front bonnet, it's not too light and still quite durable ) depends also where the bonnet takes the most brunt / impact / damage.

 

[TEAMADVAN]

haha...if above 120km/h, even the best fibre will crack into pieces like GT or F1...
but depends on how many layer of them and at wat speed to define the amount of the pieces that breaks out....i hand itchy go shake the GT AU cerumo display car before...
shake the side skirt....but the front and rear fender bend together...
u can imagine how thin is that...maybe two layer of carbon without any fibre on it....thats very light...but not safe of cos...to keep u alive from that crash, u need the roll cages like GT...hahaha...really secure like bird cages!

a roll of carbon of 50meters sq feet cost about 25K++....but various of weight...
the bigger is the squares on it, the diffrent weight and diffrent prices...
add workmanship, mould, resins and blabla...will cost u a boom!
maybe 50K or more....
thats already cost a brand new myvi full specs on the road!:emoticon_U:
unless sumone is farking loaded...car fully mod liao till noting can be mod anymore, too much cash that loads at home , and itchy to keep em....then may go for that kinda bodykit mods....:Not_Impressed:

 

[SkYwAlKeR]

taniguchi and orido not same la... taniguchi is so tall and orido is fat... hahaha...

 

[na_power]

teamadvan... that monster garage can cf everything? custom made also can?

 

[TEAMADVAN]

yah...they can almost do everything....just bring him a pics of the thing u wan...
but reasonable lar...dun bring rocket or helicopter pics lar! :_:
but the prob is the price...
for example...race craft, varis, topsecret's CF front hood will cost 2k+~4K+...
but thats large quantity manufactured....and for sale nationwide/globalwide....
for your own customed design, means for u only...
means, u pay the mould and the CF things u wan...unless u got bunch of frens to share it with u....then it will be much much more cheaper...

 

[na_power]

custome made bonnet for one person, moster garage cheaper than race craft or not?