adjustable spring too hard

sta

500 RPM
Senior Member
Dec 26, 2004
639
2
3,018
hi everyone, im using hwl adjustables on my turbo wira.
the rear springs are too hard/bumpy. front/rear rates are 8/4

is it possible to change the rear springs to softer ones ? can be bought seperately ?
 

GT_AUTO

3,000 RPM
Senior Member
Oct 25, 2005
3,503
71
1,648
K.Trg
www.facebook.com
bro,it's possible but why u wanna change it?i think 4kg/mm for ur
rear is already suitable for ur car cos ur running a turbo engine.
softer then that ur car will squat everytime u accelerate n wheelspin
will be much worst.
btw,yes u can bought it seperately.try top perfect.
they who produce HWL.
 

avaultz

Known Member
Senior Member
Apr 7, 2006
478
1
1,518
haha...

mine also damm hard. im using HWL adjustable.. but i cant soften it bcoz im my tyres will touch the arch.. lol.

so every journey must stop to tighten those loosen nuts..lol
 

sta

500 RPM
Senior Member
Thread starter
Dec 26, 2004
639
2
3,018
even with a subwoofer in the boot the spring is still too hard
i go back to the shop kakimotor they want to charge me rm400 just the change the rear spring

normally should be back and front be the same height?
my one is 3 fingers front and rear same
 
Last edited:

sfarrera

Junior Member
Senior Member
May 23, 2007
7
0
1,501
hm..
im oso facing the same prob ma..
im usng tein adjustable.
dual coil at front n single coil at the back..
ya quite bumpy n will heard the ouch sound when u goin to masok lubang o the road condition very suck!!

there are the pro n cons when using the adjustable..
but sacrifice alot of comfort for better handalling
 

m@ttz

1,500 RPM
Senior Member
May 7, 2006
1,846
13
3,138
klang
even with a subwoofer in the boot the spring is still too hard
i go back to the shop kakimotor they want to charge me rm400 just the change the rear spring

normally should be back and front be the same height?
my one is 3 fingers front and rear same
wat brand they offering u? is it include installation? normally front n rear got same height, but also depends on u, like me, my front 2 fing n rear 3 fing, so dat if there passenger in my back, my car will still nice, not become motorboat..
 

Random Post Every 5 Minutes

guyz, im gonna convert my engine very soon, from experience ppl out there who have convert and stuff, could u list me down wat i should do and check out, wat i should ask for and stuff, how's the procedure? where should i go? well i have some questions...

when converting my engine, i wanna upgrade to nissan 4 pot front and back with 5 lugs knuckle, will jpj approve this? or should i just drill the rotor to pcd 114 4 holes? or any1 could tell me a good disbrake and rotor with 4 holes pcd...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience