fog light

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
owl eyes :rofl:
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
that type of aftermarket headlamps look nice but there is a build flaw, will mist up after rain or sometimes water seeps inside.
but if u decide to buy it, do apply silicon all round.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
that type of aftermarket headlamps look nice but there is a build flaw, will mist up after rain or sometimes water seeps inside.
but if u decide to buy it, do apply silicon all round.
But bright or not? If not bright also no point.....hhahhahah:biggrin:
 

ken yeang

6,000 RPM
Senior Member
Feb 2, 2006
6,617
1,327
1,713
not just aftermarket headlamp......even aftermarket rear lamps (with so-called LED) oso flooding the market.
I saw plenty LED bulb from these rear light oredi died. So much for LED life longevity....
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
not just aftermarket headlamp......even aftermarket rear lamps (with so-called LED) oso flooding the market.
I saw plenty LED bulb from these rear light oredi died. So much for LED life longevity....
You get what you pay for mah!.......hhahahhahah

However the cheaper LED for house lighting that I am using ok woh! still going strong.....:driver:
 

ken yeang

6,000 RPM
Senior Member
Feb 2, 2006
6,617
1,327
1,713
That is good, vr2turbo. Maybe it was made in Taiwan.
China made ones are "super" in QC, as with many China made car parts. LED bulbs especially.

My car's spotlight lamp, installed with LED bulb went dead few weeks back. When I took out the dead LED bulb, the entire white plastic casing/board become brittle. Just like biskut chokolet. I could easily crush it to bits with my fingers...
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Now mostly Made in China dy. Even branded products have shifted their factories there....
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
those headlamps can be used, sometimes depends on luck, if unluckly u get a lemon product.
my foreman wanted to charge me Rm180 per bulb for my angel eyes. if times 2 RM360.
I got my made in china angel eye bulb for RM50 2 pcs.
so far so good.
 

veezard

Junior Member
Dec 7, 2015
16
0
1
Kuala Lumpur
HI, since we are on fog lights. Have any one tried Phillips Xtreme vision 100% (3500k) and PIAA northern white star (4400k) Bulbs?
I cant make up my mind if I wanna have 4400k on my headlights or on the fog light. Got all standard halogen bulbs on my lowbeam & fog.
Guys would you go for a yellow but brighter 100% bulbs or whiter but no so bright bulbs? Or just keep the standard lowbeam and change a LED fog light bulbs instead?
Please help , cant really make up my mind here.
 

ken yeang

6,000 RPM
Senior Member
Feb 2, 2006
6,617
1,327
1,713
Brightness is pretty subjective, and lots of ppl think that the higher light temp (in k), the "better" their lighting, as in 3000k is better than 4000k.
Improvement of lighting isnt dependent on bulb itself, but the lens, reflector housing and the light source, its quality. Sometimes, the ballast, the gauge of wiring, earthing, etc.

Of course, car enthusiasts mostly play around bulbs, when they wanted to upgrade their headlamp.


My previous car lighting improved somehow, when I changed to Raybrig multi-reflector lamp only. The ori H4 bulbs were retained.
 

veezard

Junior Member
Dec 7, 2015
16
0
1
Kuala Lumpur
Brightness is pretty subjective, and lots of ppl think that the higher light temp (in k), the "better" their lighting, as in 3000k is better than 4000k.
Improvement of lighting isnt dependent on bulb itself, but the lens, reflector housing and the light source, its quality. Sometimes, the ballast, the gauge of wiring, earthing, etc.

Of course, car enthusiasts mostly play around bulbs, when they wanted to upgrade their headlamp.


My previous car lighting improved somehow, when I changed to Raybrig multi-reflector lamp only. The ori H4 bulbs were retained.
Mine currently in HB4, would only be interested in changing the bulbs cos i just took the car not long ago,mazda 3 ckd (low spec) without xenon. But some how I find the lowbeams are very dim even with the fog on. Thats the reason I would like to change only the bulb and also the fog to LED (maybe).
Recommended to me was Philips xtreme vision +130% or PIAA northen star white. Have you tried any of them?
 

Random Post Every 5 Minutes

<a href="http://www.zerotohundred.com/newforums/features/164007-auto-fiesta-v3-metropolitan-college-part-2-a.html"><img border="0" src="http://www.zerotohundred.com/features/june/metropolitan_auto_fiesta_v3/balbed/banner.jpg" width="250" height="75"></a><p><b>METROPOLITAN AUTO FIESTA V3 PART 2</b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b><b></b></p><p>Images by: Mohd. Balbed</p><p><a...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience