Engine timing problem

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

fookongmick

Junior Member
Senior Member
Dec 5, 2005
12
0
1,501
I drive a Daihatsu G100 Aura.

Here's the problem:
My engine idling without the air con is 1000. That's fine with me. But when I turn on the air con, it shoots up to 1300!

Can anyone suggest a solution?

Thanks in advance
 

trex92

500 RPM
Senior Member
Aug 10, 2004
756
3
5,018
KL
Visit site
set the timing back down. Ur car is carburetor rite? Look at the carubetor below the air filter, there is one arm with a screw. That arm would move when u activate the air con and the screw would press on the timing lever on the carubetor. To find this arm, turn the air con on and off. Once u find this arm, turn the screw to play around the idle timing when the air con is activated.
 

huakenny

LB Performance
Senior Member
Feb 24, 2005
9,126
240
3,163
Kota Kinabalu
Visit site
trex92 said:
set the timing back down. Ur car is carburetor rite? Look at the carubetor below the air filter, there is one arm with a screw. That arm would move when u activate the air con and the screw would press on the timing lever on the carubetor. To find this arm, turn the air con on and off. Once u find this arm, turn the screw to play around the idle timing when the air con is activated.

if u duno how to find tat arm...ask one fren ON n OFF the aircon..and u see at ur carb there...there mus be one thing is moving...tat is the 'arm; u looking for...
 

mint8962

Known Member
Senior Member
Dec 10, 2005
146
1
1,518
Thx man, i think i have d same problem too, some more it's worst during d jam. Will try to fix it myself.
 

Random Post Every 5 Minutes

Hi guys new here.

I am mod. my car using my old 4G92P by adding Turbo. saw and old advert in Motoring mag year 1996 where Proton Pert have this kit for about 10K. The kit include:
1. Manifold and down pipe.
2. Turbin TD03 I think
3. All the piping and Intercooler
4. SAFC the old model 5 button.
5. BOV
So for about 10K better get halfcut, but then only Mitsu that can be use 4G93T (JPJ new regulation problem). So thinking of using the old engine add turbo equipment from GSR and use...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience