I am newbiez. Just purchase waja with evo 4 engine. Minimum knowledge about performance car but start learning seriously.
My problem is when ramping the engine with gear 1 approx 5000-6000rpm and than quickly change to gear 2, however once release the clutch and pressing the fuel peddle in gear 2 to speed up the car immidiately one strong knocking from the bottom of engine, probably came from clutch, transmission gear, engine mounting or other things. Mechanic did informed that engine bottom mounting rear side indicated some cracked. Was the cracked mounting initiate the strong knocking like someone knocking the hammer hardly to the engine.
Are the original engine mounting for 4g18 waja engine could be used? Earlier this waja use 4g18 engine.
I myself still did not familiar with this manual engine and frequently jerking when shifting the gear. Are my poor skill could be the contribution to the hard knocking sound?.
Appreciate to hear advise from the expert.
My problem is when ramping the engine with gear 1 approx 5000-6000rpm and than quickly change to gear 2, however once release the clutch and pressing the fuel peddle in gear 2 to speed up the car immidiately one strong knocking from the bottom of engine, probably came from clutch, transmission gear, engine mounting or other things. Mechanic did informed that engine bottom mounting rear side indicated some cracked. Was the cracked mounting initiate the strong knocking like someone knocking the hammer hardly to the engine.
Are the original engine mounting for 4g18 waja engine could be used? Earlier this waja use 4g18 engine.
I myself still did not familiar with this manual engine and frequently jerking when shifting the gear. Are my poor skill could be the contribution to the hard knocking sound?.
Appreciate to hear advise from the expert.