Sport rim shop malaysia review : Cheapest sport rims shop

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

issuzark

500 RPM
Sep 4, 2014
861
66
528
Kuala Lumpur
true, true what Bro DanzEterna said.

If the jap ori rim in bad shape, it should not be used already...and repairing the bad shape rims would be dangerous too since we dont know the condition of the repair.

If the Taiwan rim in bad shape, just pakai-buang...
But the feeling between jap ori and taiwan ones are totally different. :bawling:
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
the cons bout Taiwan rims, in an event of an accident your rims will break into pcs, happened to me once before using CE28.
if ori will just be in bad shape but rarely break.
Brother, if accident and bad shape also throw already.....:smokin:
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
Brother, if accident and bad shape also throw already.....:smokin:
last time during accident the wheel outer rim was detached from the wheel, the spokes was attached to the lugs. due to that my whole undercarriage was damaged, if was using jap wheel, true still must throw away the rim but could have saved my undercarriage.
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Thread starter
Sep 17, 2008
20,685
3,998
1,713
He go buy 5 years old rims then very very cheap.......:biggrin:

Bro. SF, next time you free I take you to one shop really a lot of rims one. I never post because very hard to find this shop. Went once, really took me a long time to find. Even google and waze that time hard to find.
It's address is Jalan Bukit Kemuning but is near to Klang...Hell a lot of tyres too, stack to the ceiling, rims all over the place. Name is Perkhidmatan Tayar and Batteri Shuang Heng

Just found they have facebook dy, and upgrade their shop too. Last time very old and dirty now under Maxxis.....

Here is one picture I found....

Ya, when time to hunt for rims, might need to book u for a day. :rofl:

By accident?:biggrin:
That shop have to turn off from main road to find one.....:rofl:
If that's the case, I think he got lost. :rofl:

nowadays 90% shop all sell imitation rim, if genuine rim one set Rm3-6K whose willing to pay for it ? Even yes later kena curi sure heart breaking...best still stay with stock old skool rim....cantek but not reliable = you throw your money to river only...
Ya, but like some are kinda concern is that, they might have bought an imitation one with the price of the originals that cost at RM3-6K. Cheapest range for ori.

RM10K above that one nothing to say lol
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,390
6,411
5,213
KL
EHHHHHHH... I bought my rims from that V Rawang place! Their trade in value is damn good, that's very true
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Thread starter
Sep 17, 2008
20,685
3,998
1,713

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Thread starter
Sep 17, 2008
20,685
3,998
1,713
Technically they aren't "fake" cuz they aren't replicas. Avanti Storm bought there.
Will check that place out too then. Maybe last stop to see which offer higher value for trade in.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Buy rims, no cash to belanja adi. :rofl:



Yours ori right?
We makan first then go see rims......hahhahahhaha:rofl:

---------- Post added at 08:51 PM ---------- 6 hour anti-bump limit - Previous post was at 08:49 PM ----------

Will check that place out too then. Maybe last stop to see which offer higher value for trade in.
Please factor everything in. No point high trade in value, then rims expensive, or tyre expensive, or charge for credit card, or no free alignment, see can get nice lug nuts or lock nuts, distance traveled,, toll, petrol, then is case got problem do you need to go back there, etc. etc.....:driver:
 

ken yeang

6,000 RPM
Senior Member
Feb 2, 2006
6,618
1,327
1,713
that is true. The new rims may be cheaper, but one might kana slaughter buying expensive air valves, balancing, alignment, etc...Be careful with hidden cost lor....
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
that is true. The new rims may be cheaper, but one might kana slaughter buying expensive air valves, balancing, alignment, etc...Be careful with hidden cost lor....
Some of their sales tactics to bring in the client first.....:smokin::banghead:
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Thread starter
Sep 17, 2008
20,685
3,998
1,713
We makan first then go see rims......hahhahahhaha:rofl:

Please factor everything in. No point high trade in value, then rims expensive, or tyre expensive, or charge for credit card, or no free alignment, see can get nice lug nuts or lock nuts, distance traveled,, toll, petrol, then is case got problem do you need to go back there, etc. etc.....:driver:
Very true, no point travel so far then end up might back to KL area to purchase. Petrol, time and toll charges and etcs.

Some of their sales tactics to bring in the client first.....:smokin::banghead:
Very true. Once bitten, twice shy
 
Similar threads   Forum
Chassis and Wheels
Exterior and Body
Chassis and Wheels
Exterior and Body
Exterior and Body
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Chassis and Wheels
Similar threads  

Random Post Every 5 Minutes

Too all the sifu, I do need advice of hw to reduce the weight of my wira

I am currently driving a Golf GTI plus a Wira wt a 4G92 single cam (m)....

I wld like to convert my wira to be a half street n half track...my first target is to reduce the weight...

I do luv the Wira sedan alot...
1.I am looking is to replace the front bornet wt a lighter part example corbon fiber or fiber.
2. I am looking ppl tht do make the rear bornet lighter, maybe corbon fiber or fiber
3. any idea hw...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience