, but the real case scenario is whether u want fetch car full of ppl or nt
? My case if 2 normal size average ppl weight 60kg sit behind corner at 90km/h n above u will slightly hit the wheel arch. if 5 ppl in car.. well travelling at 100km/h n above with road slight unevenness would surely hit the wheel arch 
thanx, actually it's my own supposedly "Pimp my ride" project so maybe only my left seat gonna used coz my sound system, tools only @ the back, have u tried it with silverstone powerblitzz tyreok i own a 97 kancil - (only the body left stock) skip the unnecessary things n straight to my suspension setup using Daihatsu L-series spring (front n back) n shock absorb-er (rear), using 14" tyre rating 165/50/R14 goodyear duraplus. Well i would say it can fit since the tyre side wall +- 5 from mine only
Hope it helps though
Bro., Duraplus got 165/50R14??ok i own a 97 kancil - (only the body left stock) skip the unnecessary things n straight to my suspension setup using Daihatsu L-series spring (front n back) n shock absorb-er (rear), using 14" tyre rating 165/50/R14 goodyear duraplus. Well i would say it can fit since the tyre side wall +- 5 from mine only
Hope it helps though
Kancil original size in 13" should be 165/60R13, therefore change to 165/55R14, is within specification....sifu's
can it be done with standard spring & absorber
---------- Post added at 03:34 PM ---------- 6 hour anti-bump limit - Previous post was at 03:28 PM ----------
sorry guys i meant 1665/55/R14 tyres
Duraplus got 165/55/R14, just not many shop carry itBro., Duraplus got 165/50R14??
---------- Post added at 09:51 PM ---------- 6 hour anti-bump limit - Previous post was at 09:50 PM ----------
Kancil original size in 13" should be 165/60R13, therefore change to 165/55R14, is within specification....
165/55R14 many brands have, but he mention 165/50R14.
Noted, brother....:wavey:oh wait i mistaken my tyre size rating its actually 165/55R14 duraplus
, actually my ori spec is 175/55R12, changed my springs & absorbers & the mudguard to tyre edge gotten that high that i can see my rear absorber top mounting screw so was thinking would a stock kelisa tyres can go in coz i would like to swap those tyres & get a new rim for my kelisa, just don't have the will to try & error my self
wahahaha... my bad, miss-read the 50
Brother, sure is 175/55R12? You coming out with many rare sizes I have not seen before....ok my bad guys & sifuses & masters
Because I am very into tyres, I try to read all specs written carefully, because slight difference can mean wrong thing....
forgive my stupidity on this matter
ok went to tyre shop few days ago, selling 2nd hand rims, as him got any kelisa stock rims @ not. ask him can go into mt kancil @ not but he says not coz lubang (hole) is diff. what does he mean by lubang diff
ok tq, not much of a difference, so die die better take my stock kelisa rim than cuba try test tengok can use @ not aaarrrrhe meant pcd... kancil is different since using ol skool pcd 110... kelisa is like wira/civic/corolla etc at pcd 100
refer pic below on how to measure pcd... its in mm if not mistaken
ok tq, not much of a difference, so die die better take my stock kelisa rim than cuba try test tengok can use @ not aaarrrr
so bro, did u mod the hub, since we're in ampang area maybe u can suggest me a shop
so bro, did u mod the hub, since we're in ampang area maybe u can suggest me a shop
| Similar threads |
|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
| R |
|
