Exhaust shop recommendation ~

Wilson13B

Known Member
Senior Member
Dec 15, 2010
296
30
528
Kuala Lumpur
Anyone know exhaust shop that had Mandrel bend technique?

I also need exhaust system recommendation from you all sifus at here ~ hehe

Car : Suzuki Swift 1.5 AT

Mod done "exhaust system" :

* Suzuki Sport Extractor
*Decat
*Mid Pipe
*S-Flow Backbox/Muffler
*Ori piping "1.6inch"

I wish to have more Mid and High end grunt ~

Thanks for any help =)
 

upontheriversky

Known Member
Senior Member
Dec 31, 2007
275
82
1,528
mandrel bent can go to supercircuit in sunway, my own personal favourite is torque gear in sunway, better workmanship than the famous everco
 

Wilson13B

Known Member
Senior Member
Thread starter
Dec 15, 2010
296
30
528
Kuala Lumpur
mandrel bent can go to supercircuit in sunway, my own personal favourite is torque gear in sunway, better workmanship than the famous everco
The price potong people one ~ especially Sunway JFA,tried before dy =X

---------- Post added at 02:20 AM ---------- 6 hour anti-bump limit - Previous post was at 02:19 AM ----------

try wei yip in sunway.....
ijal or jian hang in selayang/batu caves area.
Will try Jian Hang,coz hear from alot of fren say it's good =)

Thanks for advice ^^
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
its somewhere in selayang area...nearby batu caves temple only.......
ijal is the same....jian hang is his former sifu.....both workmanship are marvellous....
 

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,697
848
1,713
Shah Alam
or u can find mandrel bent elbows & weld it to ur selected pipe

:biggrin:
 

upontheriversky

Known Member
Senior Member
Dec 31, 2007
275
82
1,528
yea true, sunway exhaust price is damn expensive, reason i go is because they accept credit card and jian hang and ijal dont accept :D

jian hang near taman bolton in gombak area, find bhp taman bolton, its beside a shop with big continental tyre signboard

google map or gps this adress:

No 2, Jalan TIB 1/1, Taman Industri Bolton, Batu Caves
 

Random Post Every 5 Minutes

Hi guys,

As per above topic, what is the difference between an oem GT25 and an aftermarket GT25(2560 for example)? Is it true that the oem ones cannot take more than 1bar of boost?

I am planning to go for either one of these used ones which are oem, or a brand new one from garrett to be fitted into a Toyota Starlet 4efte, planning to go 2bar.

Another question is, how come those guys in UK run at 2bar, around the choke/surge line of the comp map without getting worried about blowing...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience