Tools:
1. Socket bolt size 8,10,12,14,17
2. Ratchet and long extensionbar
3. Ring spanner size 14
4. Extra bolt to tighten back engine mounting stud
[*]Do this DIY at ur own RISK, Do ur own research before dismantle.
[*]Make sure you have all appropriate/Proper and QUALITY tools
[*]All Bolts should be hand tight first before using ratchet to avoid bolt thread strip
![](http://i1310.photobucket.com/albums/s646/Punk291/b6ae0df0-7ea6-41fe-a8fe-573daecaa11d_zps974b2c23.jpg)
![](http://i1310.photobucket.com/albums/s646/Punk291/17b03e10-9a0d-47a0-8de9-769cfbdea868_zps186216b2.jpg)
![](http://i1310.photobucket.com/albums/s646/Punk291/7072a3a0-8c65-466c-875c-165eb890c6e3_zpsd96928e8.jpg)
![](http://i1310.photobucket.com/albums/s646/Punk291/62107c49-57fc-4d5b-84d6-3e47f67168e9_zps2f1291d1.jpg)
![](http://i1310.photobucket.com/albums/s646/Punk291/703ff863-e2ff-4808-b1af-a768e09026d0_zps97ceac29.jpg)
![](http://i1310.photobucket.com/albums/s646/Punk291/36410ed9-adaf-40b1-97b4-1804f298bbbd_zps55773bda.jpg)
1. Socket bolt size 8,10,12,14,17
2. Ratchet and long extensionbar
3. Ring spanner size 14
4. Extra bolt to tighten back engine mounting stud
[*]Do this DIY at ur own RISK, Do ur own research before dismantle.
[*]Make sure you have all appropriate/Proper and QUALITY tools
[*]All Bolts should be hand tight first before using ratchet to avoid bolt thread strip
![](http://i1310.photobucket.com/albums/s646/Punk291/b6ae0df0-7ea6-41fe-a8fe-573daecaa11d_zps974b2c23.jpg)
- Jack abit at the oil pan to support the engine
- Dont jack kaw kaw, later oil pan crack it's ur problem.
- Don't use hydraulic jack like i did because ur hydraulic might spoil.
![](http://i1310.photobucket.com/albums/s646/Punk291/17b03e10-9a0d-47a0-8de9-769cfbdea868_zps186216b2.jpg)
- Remove All Black,Blue and Green Bolt
- Blue Dot Bolt Size 14
- Black Dot bolt size 12
- Green Dot bolt size 17
![](http://i1310.photobucket.com/albums/s646/Punk291/7072a3a0-8c65-466c-875c-165eb890c6e3_zpsd96928e8.jpg)
- All Bolt are out
- When installing the engine mounting back, the Bolt on the green dot should be easily tighten back. If u feel hard to fit in, jack up the engine a lilttle bit more.
![](http://i1310.photobucket.com/albums/s646/Punk291/62107c49-57fc-4d5b-84d6-3e47f67168e9_zps2f1291d1.jpg)
- Let say u want to change engine timing belt upper cover
- Remove all three bolt size 8
![](http://i1310.photobucket.com/albums/s646/Punk291/703ff863-e2ff-4808-b1af-a768e09026d0_zps97ceac29.jpg)
![](http://i1310.photobucket.com/albums/s646/Punk291/36410ed9-adaf-40b1-97b4-1804f298bbbd_zps55773bda.jpg)
- The stud came off with the bolt jus now
- Use the 2 extra bolt, tighten the stud back
- Reinstall back everything in reverse order.
- The Endddddddd
Last edited: