Can anybody help? So4/Ej/Ek wiring problem

[CiVIkX]

Hello all,
can anyone help me or give me some advice about my problem here..

I've converting eg9 b16a into my ej n need to change the wiring to ek/ej one.. this is because now im using eg9 wiring n cannot use my meter panel , alarm n etc becoz it doesnt fit the car.. does anybody know where to do/what to do to the wiring for honda like changing the wiring set to ek/ej back n how much does it cost? now im using eg9 meter panel in my car n realy2 looks fucgly .. fyi i live in KL ..

p/s : sorry for those i pm to buy the ek stuff .. cannot buy yet coz of this wiring problem ..

help meee honda sifuss.. :[

 

[crxr]

Contact Jasper, he is the expert in this.

 

[hattech-v]

i think it can use... kenot aaa? coz lot of fella here converting using eg hafkat but later still can use ek/ej meter cluster...

 

[NiCkY7]

try Spoon Sports... kenny good in wiring also...

 

[CiVIkX]

i think it can use... kenot aaa? coz lot of fella here converting using eg hafkat but later still can use ek/ej meter cluster...

cannot bro .. the mech said the socket are different.. n try to go to other wireman n they also said cannot coz of the socket .. the stupid mech convert my car had cut all the wire n now they are gone.. cincai 2 doing my car ..

 

[CiVIkX]

Contact Jasper, he is the expert in this.

How to contact jasper? is he foreman ? thank you bro :)

 

[CiVIkX]

try Spoon Sports... kenny good in wiring also...

oh ? where's the place? he can change back the wiring set to ek ar bro ? thank you :) .. this stuff really makes me 'p3n1ng' lor...

 

[NiCkY7]

i think u pay a visit to there, then ask him can help u rewiring or not...

the direction; (borrowed from cybernation)...

if u come from KL through federal highway, go up to the Motorola Bridge and turn right towards Western Digital... then keep to ur left lane which u'll see Western Digital Building, dun went up to the bridge, just keep to ur left lane once u turn right after go up the Motorola bridge from federal highway, then make a U-Turn under the bridge (no need wait for the traffic lights!) Go straight until u'll see a left junction and then turn in and go straight again until u'll reach a "+" junction, Shell petrol station is on ur right side..u should turn to left side and u'll see Syed Bistro! Spoon Sport is just beside it!..Cheers..

look for kenny, contact number is 012-2789652

heard a member said that he good in electronic and wiring especially for VTEC...

dun go at weekend la, cause there will be crowded with cars... and he need do all the main things...

hope this help...

 

[barracuda]

Hello all,
can anyone help me or give me some advice about my problem here..

I've converting eg9 b16a into my ej n need to change the wiring to ek/ej one.. this is because now im using eg9 wiring n cannot use my meter panel , alarm n etc becoz it doesnt fit the car.. does anybody know where to do/what to do to the wiring for honda like changing the wiring set to ek/ej back n how much does it cost? now im using eg9 meter panel in my car n realy2 looks fucgly .. fyi i live in KL ..

p/s : sorry for those i pm to buy the ek stuff .. cannot buy yet coz of this wiring problem ..

help meee honda sifuss.. :[

no need to panic..that is a common phenomenon in conversion eg6/eg9 engine to ej/ek chasis.. there are hundreds EK/ej running around with eg6/eg9 engine..
your mechanic should know how to 'rojak' the wiring..

 

[acel]

If we transplant B16 from EG chasis to EK chasis, is there any modification on the engine mounting>?

 

[CiVIkX]

i think u pay a visit to there, then ask him can help u rewiring or not...

the direction; (borrowed from cybernation)...

if u come from KL through federal highway, go up to the Motorola Bridge and turn right towards Western Digital... then keep to ur left lane which u'll see Western Digital Building, dun went up to the bridge, just keep to ur left lane once u turn right after go up the Motorola bridge from federal highway, then make a U-Turn under the bridge (no need wait for the traffic lights!) Go straight until u'll see a left junction and then turn in and go straight again until u'll reach a "+" junction, Shell petrol station is on ur right side..u should turn to left side and u'll see Syed Bistro! Spoon Sport is just beside it!..Cheers..

look for kenny, contact number is 012-2789652

heard a member said that he good in electronic and wiring especially for VTEC...

dun go at weekend la, cause there will be crowded with cars... and he need do all the main things...

hope this help...

thank you bro ! really2 apreciate

 

[CiVIkX]

no need to panic..that is a common phenomenon in conversion eg6/eg9 engine to ej/ek chasis.. there are hundreds EK/ej running around with eg6/eg9 engine..
your mechanic should know how to 'rojak' the wiring..

ya bro .. thanx.. im just a newbie for this kind of conversion stuff.. the mechanic doing my conversion now gone (MIA) already n i think they dunno anything bout honda..

 

[CiVIkX]

If we transplant B16 from EG chasis to EK chasis, is there any modification on the engine mounting>?

yes .. the mounting need to be change .. im also have mounting problem.. the mech are very fool! ( before swap .. this can that can .. when swap .. that cannot .. this cannot

.. after swap.. the mech gone.. take comission only ) my engine shaking coz of the mounting problem n now feel like driving a lorry instead of honda..

 

[916EK]

mind telling us wat's the shop & mech name that do ur transplant?

 

[vtecD]

i think u better reconvert to sohc v lar..
no problem...u can swap wif my engine wif urs...kwang3...

where did u do ur conversion?

 

[CiVIkX]

sorry 4 the owners 4 d wokshop .. somewhere in puchong named cobra motorsports.. the owners talk sweet2 one.. but now i felt like wanna kaboommm

 

[Oderf]

dun be panic bro, the mounting can be adjusted to place properly in ur engine bay n running without any vibration due to mounting problem. just need to get to the right mechanic...be patient..n i belive this forum will lead u to the mechanic

 

[CiVIkX]

i think u better reconvert to sohc v lar..
no problem...u can swap wif my engine wif urs...kwang3...

where did u do ur conversion?

i also got one soch vtec engine dunno what to do lar... now i feel like my old engine is better than this new one.. the halfcut is ok .. but their workmanshipp .. haiya.. dunno what to say .. when go to the others mechanic they laugh at me because of the conversion ..

 

[CiVIkX]

dun be panic bro, the mounting can be adjusted to place properly in ur engine bay n running without any vibration due to mounting problem. just need to get to the right mechanic...be patient..n i belive this forum will lead u to the mechanic

yes... thank u .. that's what i believe in honda people here :D

 

[Oderf]

i was once having headace like you do now....learn it the hard way..running small v in an EJ.... btw, where r u at ? if in klang valley, there's so many place u can go to ask for help. just ask around first.