Anyone knows mod parts for 6a10 1.6 V6 ?

[mp5onfire]

hi, i'm quite new here... just need some info on where to find parts for my car.... my car is a wira but converted to 6a10 last year... it's more or less same as 6a12 but smaller cc... just wondering anyone knows any performance parts for this engine... like exhaust manifold or nice intakes....or independent 6 throttle maybe (i saw it in a australian website but i dont know if they sell it here)... i know it's a rare engine but i need all the help here... thanks guys !!! :D

 

[boyzone]

japanese guys have bolt in turbo on this engine... for our's side, look for 6A12 bolck and throttle body to plug in ... that great!!! dun forget go to lighten ur flywheel first.

if can get 6A12 cam shaft, that should be no problem to replace :D

 

[mp5onfire]

hey thanks for the tip... never thought of it....do u know anywhere in kl that i can get this stuff cheap?? me now in shah alam... thanks again

 

[boyzone]

this sorry ...I'm from Penang :D

 

[zero_kool]

hey thanks for the tip... never thought of it....do u know anywhere in kl that i can get this stuff cheap?? me now in shah alam... thanks again

well, if u want, i can ask my mech in sunway....maybe he can get some stuff for u at a cheap rate.

cheers

 

[cipan_supercas]

hi, i'm quite new here... just need some info on where to find parts for my car.... my car is a wira but converted to 6a10 last year... it's more or less same as 6a12 but smaller cc... just wondering anyone knows any performance parts for this engine... like exhaust manifold or nice intakes....or independent 6 throttle maybe (i saw it in a australian website but i dont know if they sell it here)... i know it's a rare engine but i need all the help here... thanks guys !!! :D

independent 6 throttle body eh....:rolleyes:

 

[wildboar]

i know a guy who has a wira 6a10..he changed to 6a12 block..oni changed the block..even tb, manifold & others still remain 6a10 ones..very very nice for high speed cruising..check out terato.com and look in the sales section under 'tukar engine' or sumthin like dat..the creator of the thread is jesinjames..its his car..his bro owns a workshop in batu caves..u can check him out..

p/s: i havent been to terato in a while, so not sure if the thread is still there anot..

 

[boyzone]

yes, he still there , can send a PM to him at terato website.

 

[mp5onfire]

this sorry ...I'm from Penang :D

hey no wories i'm from penang also... going back this weekend... anywhere u know??? thanks

 

[mp5onfire]

japanese guys have bolt in turbo on this engine... for our's side, look for 6A12 bolck and throttle body to plug in ... that great!!! dun forget go to lighten ur flywheel first.

if can get 6A12 cam shaft, that should be no problem to replace :D

ermm... i was wondering if i put in the 6A12 cam shaft do i need to put in the 6A12 cam pullys aswell?? and do i have to readjust the engine timing so the piston won't crash with the valve???and do i need to install any add on ECU like AFC or SAFC then do dyno tuning?? thanks bro ;)

 

[mp5onfire]

independent 6 throttle body eh....:rolleyes:

ya because i saw it in australian web site... it's for 6A12 ... but can i get it here??? thanks!! :)

 

[boyzone]

when u back to Penang, just contact me with this number : 0124602880.. see u ..:D

 

[tk2005takeru]

Need Help Here

Hey guys i'm new here and just getting a licence. I have a Proton Wira 1.6 XTi, I think is the 1st batch out of the factory @ 1992. This car is cool but I juz lost to my friend in drifting downhill. He's a Satria 1.8 GTi + 2 bar turbo. Need help here at tuning my engine to a better performance. Dunno my engine model but I think it's the stock engine. Plus I'm going to switch it to manual, please help me in this when getting a better gearbox that would not break under high stress. My car is ok and can handle 0-60 in 4-5 sec if the accel is full. But the fuel consumption is high too, full tank = 180km. And it's idling RPM is unstable, help me in this too. PLEASE HELP HERE!!! THX A LOT!!! Oh ya, I'm getting a Kevlar Undercar Protection Grill, where can I get 1?

 

[boyzone]

is time to ask u convert the engne ...liao :D

 

[kruger]

wa... boyzone from penang yer... :) i'm also at penang... hehehe... ;) got 1 6a12tt blok... anybody interested?

 

[boyzone]

yes, I'm from Penang .6A12tt is run with low compression , N/A is around 10:1

 

[tk2005takeru]

what engine should i change and any1 know where to buy here at Kota Kinabalu?? LOL, I need a new chassis i think coz everything is coming apart... All rubber and plastic aged liao... BTW, which engine u think best for my car and state the pricetag... Brand new is better... Start with my engine 1st...

 

[jtdw]

hi need some favor here

hi, fire, i need some favor here. i am jimmy here i just currently converted my engine to 6a10 which is same as your's. can i know what is the engine model during the puspakom registration??? plssssss..........help!!!!!

 

[jtdw]

hi i am jimmy teong here. i need some urgent help from you guys. i just change my engine to 6a10 and trying to do puspakom to get approval. i just want to know what is the 1.6 v6 model name in the registration card suppose to be??? for example for wira 1.3 fuel injection engine, the model should be 4g13p right??? so how bout 1.6 v6??? plsss help

 

[boyzone]

hi, jimmy... nice to meet u .. the engine code should be 6A10-engine number. :D