Alternative engine for Proton Savvy

fukushinx

From Facebook
May 15, 2011
5
0
501
www.facebook.com
hi guys,

For the intro, my sister in law have a Proton Savvy AMT and currently some part of the gearbox is not working well and after asking for the replacement parts @Proton service it costs around RM9k. So I'm thinking of suggesting her to just swap the engine into other alternative engine since the current engine maintainability is quite high.

So the question here, what are the available engines that can fit into Proton Savvy? Legally endorse of course. At the moment thinking of swapping the CAMPRO 1.3 into it but does it OK with JPJ / Puspakom?

thanks a bunch.
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
if it just gearbox why not trying to look around for continental halfcut???

savvy's engine and trans comes from renault....and i heard there's some turbo model available and possible to fit in savvy :biggrin:
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
how about 1.5turbodiesel engine from renault kangoo?? :biggrin:
 

fukushinx

From Facebook
Thread starter
May 15, 2011
5
0
501
www.facebook.com
thanks for all the reply and suggestion guys. i don't have much knowledge in European cars engine but i'll try to do some research about it.

at the moment i thought i wanna suggest my sister in law to just swap with CAMPRO 1.3 engine from Saga BLM since the front chassis is the same with Savvy. but i'm not sure about the mountings. plus the maintainance also must be quite cheap. further more I'm thinking to put 4G93T engine into the BLM :P (btw the saga BLM is my 2nd ride)
 

papagoines

Orang Tua
Senior Member
Feb 6, 2006
2,024
376
1,683
Rawang/Selangor
thanks for all the reply and suggestion guys. i don't have much knowledge in European cars engine but i'll try to do some research about it.

at the moment i thought i wanna suggest my sister in law to just swap with CAMPRO 1.3 engine from Saga BLM since the front chassis is the same with Savvy. but i'm not sure about the mountings. plus the maintainance also must be quite cheap. further more I'm thinking to put 4G93T engine into the BLM :P (btw the saga BLM is my 2nd ride)
me think it involved a lot of work... the plan to put CAMPRO 1.3 were scrapped early in the design stage, that's why they put in Renault D4F.....
 

witch13

500 RPM
Senior Member
Dec 20, 2004
558
2
3,018
seen savy convert to starlet turbo engine including endorse ..belong to a women if i not mistake.. do it at a workshop at gombak.. change engine coz the savy engine blow..
 

Random Post Every 5 Minutes

hi to all sifus and readers in this forum. here i have is a Audi A4, a friend of mine who asked me detail this car. of course i detailed this car long time ago but didnt posted at any forums before :bawling: just sharing some of my work here. if there is any mistakes you can always leave a comment, will work hard and try to correct it. and also i didnt took much pictures of it (not because i dont want to show) due to busy detailing. the rims took me 2 1/2 hours to complete due to hard...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience