Pic 1 - Remove the original regulator with 2 screws, first remove the two hose that is connected to the regulator one with the clip and the other one is the vacuum hose.
Pic 2 - This is how it looks when taken out if afraid keep the O ring in a safe place.
Pic 3 - U will need to grind off the section where my thumb and pointer is holding with a grinder.
Pic 4 & 5 - Notice that part with scar, just grind a little by little until u see the inner core.
Pic 6 & 7 & 8 - Sorry quite blurr, playing safe by using screwdriver to remove the core. Do it slowly. Remember there is a spring inside u will need it back.
Pic 9 - The part need to be removed.
Pic 10 - Without the top part.
Pic 11 - This spring is important don't loose it.
Pic 12 - Install the after market regulator tightly. Confirm the position first before installing the regulator.
Pic 13 & 14 - This is the position of the regulator. See properly. Re-fit back the return fuel hose and vacuum hose.
Pic 15 - This part no need to do if u got the meter with u if no then remove the other side of the fuel rail and attach to a fuel pressure meter to set the fuel pressure. This part quite complicated if u don't have a fuel pressure meter.
* I can help if u wan hahaha done .... after installing car no improvement only the ride smoother in gear change and can feel the car holding its power already .... worth changing ....
Pic 2 - This is how it looks when taken out if afraid keep the O ring in a safe place.
Pic 3 - U will need to grind off the section where my thumb and pointer is holding with a grinder.
Pic 4 & 5 - Notice that part with scar, just grind a little by little until u see the inner core.
Pic 6 & 7 & 8 - Sorry quite blurr, playing safe by using screwdriver to remove the core. Do it slowly. Remember there is a spring inside u will need it back.
Pic 9 - The part need to be removed.
Pic 10 - Without the top part.
Pic 11 - This spring is important don't loose it.
Pic 12 - Install the after market regulator tightly. Confirm the position first before installing the regulator.
Pic 13 & 14 - This is the position of the regulator. See properly. Re-fit back the return fuel hose and vacuum hose.
Pic 15 - This part no need to do if u got the meter with u if no then remove the other side of the fuel rail and attach to a fuel pressure meter to set the fuel pressure. This part quite complicated if u don't have a fuel pressure meter.
* I can help if u wan hahaha done .... after installing car no improvement only the ride smoother in gear change and can feel the car holding its power already .... worth changing ....
Attachments
-
42.2 KB Views: 381
-
46.1 KB Views: 358
-
25.9 KB Views: 363
-
22.5 KB Views: 361
-
66.5 KB Views: 369
-
33.1 KB Views: 417
-
37.5 KB Views: 354
-
35.1 KB Views: 359
-
55.2 KB Views: 487
Last edited: