Knuckle conversion from 4 lugs to 5 lugs

NeuroOne

WFH
Senior Member
Sep 11, 2006
2,074
181
1,663
Putrajaya
means take out brake disc n caliper perdana and replace with vrg is it
sorry so much question... newbie :biggrin:
yep. just replace the disc and caliper.
but the VRG disc and caliper u got is 4 lugs or 5 lugs?
if 5 lugs, then u kena tebuk la ur Perdana hub..
anyway, mane dapat? berapa?
 

LowKey2677

Known Member
Senior Member
Jan 26, 2010
165
2
1,518
Kuala Lumpur
Any modifications needed if i were to fit a complete FTO brake set to a 1.5 wira? Im planning to change from 4x100 to 5x114.3. Any idea of whats the best way to go?
 

LowKey2677

Known Member
Senior Member
Jan 26, 2010
165
2
1,518
Kuala Lumpur
Danz, the reason im thinking of changing to FTO brakes is because its 5x114.3. I have a set of wheels that i would like to fit which is 5x114.3. Whats the cheapest way of converting to 5 lugs? If tebuk lobang also need to change the knuckle rite.
 

l2s_turbo

1,000 RPM
Senior Member
Oct 23, 2004
1,068
154
3,163
Knuckle no need to change..
 

GRexer

GRexer™ KuzTomZ
Senior Member
Nov 14, 2003
1,199
10
3,138
Puchong
LowKey2677, if Wira to FTO, just swap the whole set, front inclusive of knuckle, rear inclusive of lower arm, plug and play.
 

LowKey2677

Known Member
Senior Member
Jan 26, 2010
165
2
1,518
Kuala Lumpur
Would there be any fittament issue after changing to FTO brakes? Read somewhere that someone changed to FTO setup and his wheels are sticking out from the fender due to bigger calipers. What are the PRO n CONs if i tebok lobang VS changing to FTO brakes?

Thank you, in advance, for all your assistance in this matter.
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,911
3,371
3,213
PJ
www.primeperdanaclub.com
of course changing to FTO knuckle itself is better than tebuk the hub, as human error might occur sometimes,
if the holes are not accurate u may face rims not fitting properly or wobbling.
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
some design of 15" rim wouldn't fit....so in general i would say minimum is 16" rim....
 

Random Post Every 5 Minutes

hi all, been reading through all the horror stories on the board.

I have began modding my ride, and now contemplating not to drive it out to anywhere besides shows and and friends house with high rise wall.

anyways, does anyone here knows about Lexan resin? it's the material the use in racecars, especially the windshield, as it has a higher impact resistance than glass. It is also use to make racing helmets. and if you watch mythbusters on discovery, that's Lexan they stand behind when...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience