Hello Guest! Log in or Sign up for a full experience & ad-free!

If use oil cooler, do I need to upgrade oil sump?

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

Sil80-13

1,000 RPM
Senior Member
Joined
Mar 15, 2009
Messages
1,215
Points
1,648
Hi,

If I want to install an oil cooler, is it a must to upgrade my oil sump as well?
 
Opps...Sorry. It's Oil Pump. But some ppl call it oil sump. Right? :biggrin:

Means upgrade to larger in order to install oil cooler. It's a MUST?
 
Opps...Sorry. It's Oil Pump. But some ppl call it oil sump. Right? :biggrin:

Means upgrade to larger in order to install oil cooler. It's a MUST?

It won't hurt to have faster flowing oil since you're reducing the oil pressure by adding the cooler. But this is highly dependent on the type of cooler you're installing. If it's a small one and doesn't affect the pressure much then no need la. If you're gonna go bigass with the cooler then most likely a stronger oil pump would be useful
 
faster flow of oil is good, but moving bigger oil volume at a higher rate with upgrade oil pump will cause parasitic lose for the engine. You gain something, you lose something...
 

A Post Every 5 Mins

Based on 76mm bore and 87.3mm stroke,
any shifu here can advise how to get them? I've seen forms for customize pistons but there are some items that I do not know/unsure of how to fill them up.

would require the following:

1. Forged lowcomp pistons
2. Forged conrod
3. Bearings to withstand high boost.
4. Headstuds.

Please, constructive comments only, I know all would want to say "change engine betteR" and stuff like that but I've decided to stick to 4g18.

Any contribution...

Online now

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom