Hyundai Chop shop info thread

[BlackSamurai]

Guys,

More and more Hyundai owner look for Hyundai chop shop item.
Let's start a thread to list down all Hyundai chop shop around Malaysia that you know.

For gearbox and transmission
Sun Eng Hup
www.sunenghup.com.my
Tel: 03-6250 0000
Location: KL Segambut area
(URL not working at last time I check, but the phone is working )

Sun Eng Hup do re-con gearbox transmission, according to the news article i read, they import the parts from Korea, and the part is usually 70-80% new.

They do sell other Hyundai used parts, but their quoting very funny, everything RM160, last think I call and ask for used wiper arm, they quote me RM160, but original brand new genuine wiper arm for RD Tiburon is just RM110.

 

[ABV9750]

i've been there somtimes ago and i saw a back portion of tiburon.maybe they hide the front portion.
parts wise, they have a lot but the price quite expensive.the gearbox after recond is rm3+++ for replacement.

a few friends told me at kajang - semenyih area have a few singapore halfcut. funny thing is spore only have a 1.6. but HK has 1.8.

come on guys...there should be a lot of this halfcut at johor area cause 70% of spore halfcut land in johor..hehehe

ok..i'm stick to Hakitrade..

 

[acbc]

There a chop shop in Kampung Sungai Buloh that sells Korean halfcuts.

 

[ketapang_inn]

Guys,

More and more Hyundai owner look for Hyundai chop shop item.
Let's start a thread to list down all Hyundai chop shop around Malaysia that you know.

For gearbox and transmission
Sun Eng Hup
www.sunenghup.com.my
Tel: 03-6250 0000
Location: KL Segambut area
(URL not working at last time I check, but the phone is working )

Sun Eng Hup do re-con gearbox transmission, according to the news article i read, they import the parts from Korea, and the part is usually 70-80% new.

They do sell other Hyundai used parts, but their quoting very funny, everything RM160, last think I call and ask for used wiper arm, they quote me RM160, but original brand new genuine wiper arm for RD Tiburon is just RM110.

damm expensive this halfcut....they quote side signal for elantra is rm 120.00....
bought at another shop new one just rm 60.00

 

[BlackSamurai]

There a chop shop in Kampung Sungai Buloh that sells Korean halfcuts.

acbc, i actually saw a RD coupe half cut 2 years ago, but i cannot re-locate the shop, can you help?

 

[koren]

anione knows where to get an accent gearbox? and roughly how much?

 

[BlackSamurai]

koren, call Sun Eng Hup as I posted at here, they will give you the price.

 

[acbc]

BS: Will check it out because my tools supplier is nearby.

 

[ed0gawa]

Whats the engine that are available in Singapore?

1.6 Dohc? whats the engine model?

 

[ketapang_inn]

where to find chop shop for hyundai?? if posible near k.l
i need to find elantra 2 drive shaft..very hard to find,
Sun Eng Hup asking for rm250,halfcut condition with no warranty.


please anybody help me.

 

[BlackSamurai]

ketapang_inn, call up Mr.Lee for Elantra Drive Shaft (NEW), shall be cheap.
012- 229 6855

 

[ketapang_inn]

ketapang_inn, call up Mr.Lee for Elantra Drive Shaft (NEW), shall be cheap.
012- 229 6855

thanks...i try call but cannot get thru, maybe i try again tomorrow.:regular_smile:

 

[ketapang_inn]

got thru but he said no more. any one else?

 

[ABV9750]

hi, what engine inside your elantra 2? mirage 1.6? or Beta 1.6? why are you asking for the drive shaft? if its sound crack..crack during turning, then just change the new CV joint.my elantra 3 use mirage 1.6 CV. new price around rm160.

 

[ketapang_inn]

well i'm using 4g67 it a mirage 1.8 and i install a bolt on turbo.and my drive shaft yes sound like crack..but when bumping also when do some cornering,i already check at workshop and they said that my drive shaft not so good anymore..and not the outside cv joint but inside...that why hard to find.

 

[ABV9750]

if so then, look for mirage drive shaft set..i think it should fit well.
another option is to rework the inner CV. but in your case, turbo engine might kill it fast.
i dun think the inner cv would sound during cornering. normally it does during accelerate. you will notice a vibration..or crack.
anyway. let me check with my friends whether he has the item you want...which portion do you prefer? left or right? or both together? does the 1.6 will fit?

 

[ketapang_inn]

well i never test with 1.6 so i dont know if it will fit...and i need to long one..dont remember left or right but its a long one for sure.

and thanks.

 

[ABV9750]

hi, i'd just confirm with friend that the 1.6 elantra 2 is not match with your 1.8. may be you could check at Mits mirage stuff.
the best way is to dismantle it and try to match at kedai potong..

 

[ketapang_inn]

well thanks anyway

 

[apex]

try check it here...

http://www.enginetyre.com/cms2/