4g91

[Yong_5290]

hi guys...i getting 4g91 halfcut edi...

wat i need 2 noe is the piping size suitable 4 the engine...o should i juz use back my stock wira piping?

 

[kher]

wa..interesting engine... a twincam version of 4G15.... ;)

Anyone know how many HP tis engine produces?
N how significant is the diff between 4G15 n 4G91?

 

[alvin24]

4G91 has 115hp on engine... 4G15 has around 80 on engine... u do the math. =Þ

I think the stock pipings are enuff lar if u aren't planning to mod till to extreeme... else go for 1.8 inch internal diameter... should suit 4G91 perfectly. 2" could be too big... will make the car a bit sluggish.

 

[kher]

4G91 easy to upgrade ah?

potential or not? :huh:

 

[saru-kun]

Originally posted by kher@Feb 18 2005, 20:50
wa..interesting engine... a twincam version of 4G15.... ;)

Anyone know how many HP tis engine produces?
N how significant is the diff between 4G15 n 4G91?

4G91 is not the twin cam version of 4G15

its in the 4G9x series of engines utilizing a different block design...similar to the 4G92 and 4G93

speaking of which, there IS one model of 4G15 which is DOHC

cheers

 

[drexchan]

For the specification of Mitsu 4G9x series engine, please refer to the link below:

http://drexchan.fotopic.net/c435871.html

it's a manual in JPG version. For PDF version, PM me.

 

[kher]

Originally posted by drexchan@Feb 19 2005, 01:29
For the specification of Mitsu 4G9x series engine, please refer to the link below:

http://drexchan.fotopic.net/c435871.html

it's a manual in JPG version. For PDF version, PM me.

got other mitsu series 1???

 

[Yong_5290]

Originally posted by drexchan@Feb 19 2005, 01:29
For the specification of Mitsu 4G9x series engine, please refer to the link below:

http://drexchan.fotopic.net/c435871.html

it's a manual in JPG version. For PDF version, PM me.

thx drexchan... :D

any1 wan 2 complain on its fuel consumption? rm 50 can go how many km?

 

[drexchan]

Originally posted by kher+Feb 19 2005, 01:34 --></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (kher @ Feb 19 2005, 01:34 )</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-drexchan@Feb 19 2005, 01:29
For the specification of Mitsu 4G9x series engine, please refer to the link below:

http://drexchan.fotopic.net/c435871.html

it's a manual in JPG version. For PDF version, PM me.

got other mitsu series 1??? [/b][/quote]

still looking.

Anyway, I also have this Mitsubishi Manual Transaxle for F4M2, F5M2, F5M3, W5M3

 

[deftons]

Yong_5290,

how much u get the 4G91?

 

[tajulsans]

ive been using this engine for few years now.. last time when my bro transplant the engine, it was 2k++ including assembly for an auto ones.. my comment is that it is a good and reliable engine.. forget the clicking sound during morning start and ull be more than happy using it.. :P power for the engine is good, even though not as big as 4g93 but sufficient enough.. fuel consumption is ok.. 450 - 550 for 50 bucks of petrol, depending on ur setting..

ohh, my piping setup is 2" front to back and 4-2-1 extractor.. lastime using it with standard muffler, mid to high range power is realy good.. now changed my muffler already to S-flow ones.. power not so good la.. but its leaner and the exhaust note is realy a music to my ear.. :D

 

[Yong_5290]

erm..i thought S-flow design muffler is good 4 auto car?

kiyoshi...
i was was quoted rm 3.2k 4 evrything...xcept jpj hassle onli...they kau tim 4 me the timing belt...installation...wiring...piping...but the price include trading in my old engine....n it 4 a auto half vut...i'm using back my manual gb...
the price 4 halfcut all gone up lah...in klang a manual 4g91 is now rm2.9k!!!!!giler...

 

[g88]

wah drexchan so many ppl approach you liao hor :P

 

[tajulsans]

i'm runnin manual tranny already.. mayb the muffler does not match as it is a tanabe G medalion for eg vtec.. now lookin for putra standard muffler to try out..

 

[Yong_5290]

Originally posted by tajulsans@Feb 20 2005, 11:53
i'm runnin manual tranny already.. mayb the muffler does not match as it is a tanabe G medalion for eg vtec.. now lookin for putra standard muffler to try out..

eh..no prob 1 rite....
until now tis engine giv any prob 2 u?


2day me n kher went hunting 4 4g91 in kedai potong...n i got myself
a low mileage 4g91 auto tat was chop in japan on 1/2/2005...
the mileage...39xxxkm... :D damn new
price...rm2000 witout bodyparts...

 

[kher]

Originally posted by Yong_5290+Feb 21 2005, 18:07 --></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Yong_5290 @ Feb 21 2005, 18:07 )</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-tajulsans@Feb 20 2005, 11:53
i'm runnin manual tranny already.. mayb the muffler does not match as it is a tanabe G medalion for eg vtec.. now lookin for putra standard muffler to try out..

eh..no prob 1 rite....
until now tis engine giv any prob 2 u?


2day me n kher went hunting 4 4g91 in kedai potong...n i got myself
a low mileage 4g91 auto tat was chop in japan on 1/2/2005...
the mileage...39xxxkm... :D damn new
price...rm2000 witout bodyparts... [/b][/quote]
got bodyparts la.... the 2 fenders la... hahaha... :lol: :lol: :lol:

 

[SPEEDSPiRiT]

so wat GB r u using?
1.3 or 1.5?
can use 1.3 gb?

 

[Yong_5290]

yes...u can just use back ur std 1.3gb o 1.5gb...

 

[Yong_5290]

any1 know wat should i do 2 tweak tis little engine a bit?

xtractor will be my 1st choise...
then a fuel regulator...
spark plugs...

engine blue print n balancing?nah...the price is killing...
nos wet kit...if sum1 can tell me more bout it....
engine management...e-manage? y do they sumtimes call it a E-DAMAGE???
port polish...erm...4 the price i think its quite xpensiv...
any other way of modding?

 

[alvin24]

modding got 100 and 1 ways to do... too many to mention here... Work with your budget and your expectations out of your mods.

extractor is a good start... i still think 2" is too big for a 4G91... use 1.8 inch internal diameter... you'll have better response than a 2". Fuel regulator is also a good choice... tweaks up the response a lot more.

Spark plugs... err... doesn't really effect much. Spark plug cable... no comments, coz' never tried. I'm still using my oem spark plug cables...

Here's a lil' something you can try... get 4G93 n/a cams... their of slightly higher profile that OEM 4G91's... somewhere between 0.5-0.9mm higher lift for intake and 0.2-0.9mm lift for exhaust, depending on version (yes, there are different versions... the only way to differenciate them is to measure)...

Piggy back computers aren't really that necessary unless u've done quite a lot on your engine... else u'll probably only get a hp or two from the thousands spent on electronics.