4agze loosing power while boosting

[gtz4agze]

i have reciently put a 10psi pullry kit on my 4agze but..... when i get to about 5-6000 rpm it starts to
get slugish! is it the factory computer thinking there is to much air?? do i need a piggy back thing (technical term) for the gas and air flow?? help!!!

 

[miriguy]

its a knock sensor issue. i assume u upgraded to a 14psi pulley?

 

[gtz4agze]

na only just upgraded to the 10psi pulley!

 

[miriguy]

originally is alreadt 10psi pulley. or did u upgraded to lightweight pulley?

 

[gtz4agze]

originally it has an 8psi pulley. so upgraded . it was working fine before i put on the pulley

 

[miriguy]

yr motor is from the AW11? try tighthen your belt. belt needs to be tighthen also after a few laps

 

[gtz4agze]

motor is from ae101 tryed to tighten the belt didnt work. its weird it happened as soon as i left the work shop.

 

[scoupe]

hmmm i thought ae101 suppose to have 10psi pulley.. are u talking bout the power dip at 5.5k rpm?

 

[gtz4agze]

had a 8psi standard one. yea has a power dip around there did do it before but powered through it now doesnt power through it

 

[baby_cky]

check your charger u runing on air flow type or map type????
my use to hav tis problem but my is piston problem