Braking issue

lukel95

Known Member
Dec 6, 2016
75
0
6
29
GB birmigham
Hi guys, recently if i full lock to the left and then brake whilst reversing my brakes make a very loud sort of trumpet sound, any ideas?

Sent from my SM-G935F using Tapatalk
 

crazykatak

500 RPM
Senior Member
Mar 1, 2006
776
48
1,528
Subang Jaya
might indicate a jammed brake piston or uneven rotor.
working the rear piston is such a hassle and takes alot of patience lol.
from your description, it sounds like it is not releasing fully or releasing too slow.
i had the same thing about 9 years ago..right after that, I found out that the rear brake was going to be jammed (after changing new pads).

try looking at 2 areas:

1. Rear brake caliper assy (pin, piston, pads, cables); check out the condition.
2. Rear brake rotors (uneven wear , warped)

good luck
 

lukel95

Known Member
Thread starter
Dec 6, 2016
75
0
6
29
GB birmigham
might indicate a jammed brake piston or uneven rotor.
working the rear piston is such a hassle and takes alot of patience lol.
from your description, it sounds like it is not releasing fully or releasing too slow.
i had the same thing about 9 years ago..right after that, I found out that the rear brake was going to be jammed (after changing new pads).

try looking at 2 areas:

1. Rear brake caliper assy (pin, piston, pads, cables); check out the condition.
2. Rear brake rotors (uneven wear , warped)

good luck
Okay great thank you, I also hear a quiet scraping noise when I brake coming to a stop and especially going downhill the noise will continue after releasing the brake.
What should I look for in the caliper and what should I do?
Also can you tell if a rotor is warped?

Sent from my SM-G935F using Tapatalk
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Okay great thank you, I also hear a quiet scraping noise when I brake coming to a stop and especially going downhill the noise will continue after releasing the brake.
What should I look for in the caliper and what should I do?
Also can you tell if a rotor is warped?

Sent from my SM-G935F using Tapatalk
Spin the disc and see how it turns. If warp, as it spins can see it wave left and right
 

Random Post Every 5 Minutes

been in my head for months edi, just lazy, so woke up today at 8am got nothing better to do, took out my air ram, measure the opening and starts cutting away, its a 30mins job with porper tools

+ve effect
-engine stable at low rpm
-lighter pedal needed for the same amount of power
-smooth, very light engine response, it feels like no aircond on even with the aircond turn on.

-ve effect
cut my finger....:nurse:
dirty my hand....:smokin:
i press the pedal more cos shiok!!:driver...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience