Sunline Japan Z33 Nissan 350Z Fairlady Carbon Fibre Engine Cover

Status
Not open for further replies.
Exterior and Body

Sunline Japan Z33 Nissan 350Z Fairlady Carbon Fibre Engine Cover

D`s Garage

7,000 RPM
Aug 1, 2012
7,793
11
638
Kuala Lumpur
Sunline Japan Z33 Nissan 350Z Fairlady Carbon Fibre Engine Cover



Selling price are from RM5xx only

Interested please contact us @ [email protected]
We are located in Bandar Sunway beside Sunway College.Behind Works Engineering.
012-2206117 (Denny)
016-9973300 (MATT)
Dealers are Most welcome!!! Price can be alot lower for Quantity purchase!

Check out our D`s Garage sales item.
Find us in Facebook D`s Garage.
 

Attachments

D`s Garage

7,000 RPM
Thread starter
Aug 1, 2012
7,793
11
638
Kuala Lumpur
:wavey:

---------- Post added at 03:15 PM ---------- 6 hour anti-bump limit - Previous post was at 12:40 PM ----------

:wavey:
 

D`s Garage

7,000 RPM
Thread starter
Aug 1, 2012
7,793
11
638
Kuala Lumpur
:listen:

---------- Post added at 02:23 PM ---------- 6 hour anti-bump limit - Previous post was at 10:29 AM ----------

:wavey:

---------- Post added at 05:25 PM ---------- 6 hour anti-bump limit - Previous post was at 02:23 PM ----------

:wavey:
 
Status
Not open for further replies.
Similar threads   Forum
Exterior and Body
Chassis and Wheels
Exterior and Body
Exterior and Body
Exterior and Body
Exterior and Body
Exterior and Body
Engine and Performance
Exterior and Body
Exterior and Body
Exterior and Body
Exterior and Body
Interior and Cockpit
Interior and Cockpit
Engine and Performance
Engine and Performance
Engine and Performance
Exterior and Body
Exterior and Body
Exterior and Body
Similar threads  

Random Post Every 5 Minutes

My friend who own a mitsu engine with its O2 sensor connect to apexi timer get a very low reading on O2 voltage,0.07 to 0.18volt only.last time it was fine can get normal reading.
sensor already change to another unit but still the same scenario.
the O2 sensor is a 2 wire unit.(blue/white)
i measure the voltage direct from the sensor both wire and get 0.1v same as what shown in the timer.Then i measure with a multimeter,the signal wire (+)and the chasis(-) ground then i get 0.45v...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience