Roll Fender

[haywiress]

Hi guys. Please highlight me where I can get this kind of service. Address; etc. :hmmmm:

 

[DarkAccoon]

just get a steel pipe with a diameter big enough. stuff it in between ur tire and fender, get someone to drive a bit and you would have saved a lot on hiring ppl to do.

 

[haywiress]

I have done that before on my previous ride. Its crack my paint on the fender. Such nightmare & I want something proper. Lol.

 

[afariq]

Hi guys. Please highlight me where I can get this kind of service. Address; etc. :hmmmm:

I've seen them do this with the tool in sunway. Call to confirm.

Hup Shun Tyres Auto Car Care Sdn. Bhd.
11, Jln. PJS11/7, Bandar Sunway
46150 Petaling Jaya
Tel: 03-5632 9926 , 5637 2275

 

[haywiress]

I've seen them do this with the tool in sunway. Call to confirm.

Hup Shun Tyres Auto Car Care Sdn. Bhd.
11, Jln. PJS11/7, Bandar Sunway
46150 Petaling Jaya
Tel: 03-5632 9926 , 5637 2275

Alrite, thanks bradah!
Hopefully no more scraping between my wheels & fenders!

 

[yaw90]

i did mine at craftmotorsport sunway.
luckily , i just done my matte black paint no longer and when i do the roll fender , the paint din crack.

here is their fb : Craftmotorsport Sunway | Facebook

 

[SE86]

craft motorsports..can try out..good service..

 

[haywiress]

Will try out the given option..

 

[DanzEterna]

ya, becareful the workmanship, remind those workers not to crack the paint.

 

[vr2turbo]

It depends more much bending of the fender, right?
The paint is dry and rigid and when fender is bent, the paint will crack....

 

[risyia]

The trick is to heat up the paint work with a heat gun, to soften it prior to rolling the fender.

 

[vr2turbo]

The trick is to heat up the paint work with a heat gun, to soften it prior to rolling the fender.

Heat Gun? Hair Dryer?

 

[risyia]

Hair Dryer not hot enough - use a Heat Gun, like this

Heat gun - Wikipedia, the free [email]encyclopedia@@AMEPARAM@@/wiki/File:US_Navy_030115-N-8590B-042_Sgt._Peter_Dimartino_from_Marine_Medium_Helicopter_Squadron_Three_Six_Four_(HMM-364)_applies_.jpg[/email]" class="image"><img alt="" src="http://upload.wikimedia.org/wikipedia/commons/thumb/0/0c/US_Navy_030115-N-8590B-042_Sgt._Peter_Dimartino_from_Marine_Medium_Helicopter_Squadron_Three_Six_Four_%28HMM-364%29_applies_.jpg/86px-US_Navy_030115-N-8590B-042_Sgt._Peter_Dimartino_from_Marine_Medium_Helicopter_Squadron_Three_Six_Four_%28HMM-364%29_applies_.jpg"@@AMEPARAM@@commons/thumb/0/0c/US_Navy_030115-N-8590B-042_Sgt._Peter_Dimartino_from_Marine_Medium_Helicopter_Squadron_Three_Six_Four_%28HMM-364%29_applies_.jpg/86px-US_Navy_030115-N-8590B-042_Sgt._Peter_Dimartino_from_Marine_Medium_Helicopter_Squadron_Three_Six_Four_%28HMM-364%29_applies_.jpg

---------- Post added at 01:05 PM ---------- 6 hour anti-bump limit - Previous post was at 01:00 PM ----------

For step by step instructions for rolling fender see here;

RollYourFender.Com - Instructions - Fast, Easy, & Affordable Professional Fender Lip Roller Rental

 

[mivec91]

use a heat gun to warm up and soften ur paint 1st... then roll with no prob

 

[vr2turbo]

Hair Dryer not hot enough - use a Heat Gun, like this

Heat gun - Wikipedia, the free [email]encyclopedia

---------- Post added at 01:05 PM ---------- 6 hour anti-bump limit - Previous post was at 01:00 PM ----------

For step by step instructions for rolling fender see here;

RollYourFender.Com - Instructions - Fast, Easy, & Affordable Professional Fender Lip Roller Rental

Yup, my service department have one like that. Nicknamed Industrial Hair dryer.....
But have to be careful also. Cannot heat on one spot too long, the paint might strip......

 

[haywiress]

Hmmmmm... I'm still not done yet. Busy with my hectic work. :argh:

 

[afariq]

you should try craft as yaw suggested.. i did based on his recommendation on this thread and i'm damn happy. Ah Loon is very informative too

 

[txperimental]

how much does it cost to roll the fender?

 

[infinity.melvin]

they can only roll "U" shape fender

for thinner fender like some k-cars "V" shape fender, they cant roll.. dont know why though

 

[vr2turbo]

Cannot roll then knock if still require to do it. Our old school method....