Proton Putra 1.8 Turbo Conversion

[koreng]

Hi to all ZTH members,

May i know what is the price like for proton putra turbo conversion? I m currently on stock standard proton putra 1.8cc. Any advice on the conversion? My budget is around RM7k, enough to play around with?

Thanks in advance. looking forward for d replies. .

 

[just4z]

enuf for bolt on only. coz for 4g93t halfcut 7k above from what I know. 4g63 maybe more

 

[AD_EG]

7k ...dont think enough for the halfcut also...not yet include installation ..better get BOT.

 

[gsrTurbo9166]

GSR halfcut is around 8k + 2k for installation n wear&tear parts.
so end up ard 10k.

if u manage to sell off ur putra 4G93p engine at ard 4k
then it should b enuff.

alternative, u can get Evo1 which cost ard 6k but u will be having prob when having ur engine registered.

 

[AD_EG]

GSR halfcut is around 8k + 2k for installation n wear&tear parts.
so end up ard 10k.

if u manage to sell off ur putra 4G93p engine at ard 4k
then it should b enuff.

alternative, u can get Evo1 which cost ard 6k but u will be having prob when having ur engine registered.

forgot about the 4g93 engine price...if sell outside around 4g93 ..if trade in duno how much...

 

[koreng]

Thanks for the replies, i was told a total conversion cost for a halfcut gsr would come to the total of RM 8K. So it is true, i have to prepare 10k for the conversion. Plus engine may need to be overhauled. SIGH. Thanks again.

 

[gsrTurbo9166]

forgot about the 4g93 engine price...if sell outside around 4g93 ..if trade in duno how much...

not pretty sure about the price of a 4G93 but from the marketplace it should be around 4k

if trade in don think can get high price since the shop sure wanna untung a bit from there

---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------

Thanks for the replies, i was told a total conversion cost for a halfcut gsr would come to the total of RM 8K. So it is true, i have to prepare 10k for the conversion. Plus engine may need to be overhauled. SIGH. Thanks again.

no prob. try to get a good condition halfcut so that it will save u alot in term of wear & tear parts as well as overhaul.
do consider the $ for a bigger turbine (TD05) and a front mount i/c as well.

 

[ayoi84]

Thanks for the replies, i was told a total conversion cost for a halfcut gsr would come to the total of RM 8K. So it is true, i have to prepare 10k for the conversion. Plus engine may need to be overhauled. SIGH. Thanks again.

bro go for high cam, mod ur oem engine. with ur 7k budget it already enough for 272 or 288 cam, 4-2-1, hi-com piston, P&P, bigger t.body, gsr intake, piggyback ecu.. :) just my suggestion.. happy mod :)

 

[93na]

bro go for high cam, mod ur oem engine. with ur 7k budget it already enough for 272 or 288 cam, 4-2-1, hi-com piston, P&P, bigger t.body, gsr intake, piggyback ecu.. :) just my suggestion.. happy mod :)

ya bro y not play na!!!! i used to have a putra also{gsr engine} used bout 2 years engine kong!!!
bought a standard putra engine play na p&p, 288 mat speed cams, j5 ecu, forged piston high com!,, and a few more la!!!! was pushing out 180bhp!!!! can bantai bro no need to manja manja like turbo used another 3 years just let go in january!!!!! best main na!!!!!

just my suggestion also:wavey::driver.......

 

[DanzEterna]

yeah..if you're on a budget, just play na...
na also kuat ma....cos gsr halfcut already rm7.5k

 

[93na]

bro go for high cam, mod ur oem engine. with ur 7k budget it already enough for 272 or 288 cam, 4-2-1, hi-com piston, P&P, bigger t.body, gsr intake, piggyback ecu.. :) just my suggestion.. happy mod :)

yeah..if you're on a budget, just play na...
na also kuat ma....cos gsr halfcut already rm7.5k

ya true plus must overhaul the engine, belting must change, dont know how the others parts, gear box??? for the engine to be running smooth and no worries u need around 13k bro,, piping some more if dont change scared leaking. after all that got jpj to think!!! dah nak akhir tahun $$$$$ mesti kurang!!!! kaw tim sini kaw tim sana!!!!!!!

 

[contreasjun27]

buy all the gsr parts defiantely sufficeint to make ur car run + a management bro..

 

[karem]

think if wan to play bolt-on it's also recommended to play around internal parts (low-comp piston) for better satisfaction.
else just play NA like ayoi84 & 93na suggest... can still go fast, reliable & quite tasty also :)

 

[wira3319]

wow..h/cut gsr only 8k..why in my place gsr h/cut at dead price 12k..no kurang2..sigh..

 

[DanzEterna]

where your place bro? JB ka?
different places different prices bro..
maybe rm12k include halfcut + workmanship + endorsement.
kira rm12k all in.

 

[wira3319]

my place far2 away frm you all..west m'sia sabah..hehe..
nope its only for the h/cut..damn siot..w/manship + wiring + endosrment = take another 2 - 2.5k

 

[koreng]

Sorry for the long silence, after many sleepless night, ive been thinking, to go for na mods just like our 2 members said. is it safe to play around with OEM engine? overheating perhaps? might need to take your number for advice. .Very helpful of you guys for the replies. .Many thanks. Then again, whats the true cost of modding the OEM engine? High cams? hmmm sounds interesting. .have u heard of BHP Racing tuning?

 

[LuKa]

If you are looking to build a monster... Force Induction is a better way.. and any mods n tweaks later on wont cost u a bomb... playing NA is tough... u spend more for little horses increase... even to reach 180 Whp is hard enough to tune for reliability for daily use.... if you ask me is it better to mod your current engine.. or to mod a used n u dont even kknow what the engine ur buying have gone through or the problems.. my answer would be mod the current 93P engine of yours... the C99 series would be the best engine from protons for modifications.. if you are looking high figures of hp... u hv to save up n go straight to internal modding... pnp.. pistons,cams,clutch,intake,extractor,trottle body + piggy backs...

 

[koreng]

I see. . Thanks again for d replies. Sigh Confusion. Lemme think it over the weekend again. hehe. Hence, Thanks for d advices guys, Somehow will help on spending my budget wisely. .Many thanks

 

[ayoi84]

Go for NA bro!!! NA Rocks!!
go for highcam 272 or 288, gsr manifold, t.body mivec/evo/perdana, 4-2-1 extractor (cusco design), P&P head, Hi-com piston, Metal Gasket, Piggyback (safc2,emanage,afcneo), dont forget to buy toyota FICD to stable ur idling when ur aircond is ON!! Happy mod!!!