Mod Waja To Evo 4 engine or MIVEC 1.8 engine?

[CrankShaft]

cool guys...thanks for the info ...
do you guys know how much will it cost for the whole project converting waja 1.6 auto to 4G93T? Can I trade in my old engine?

 

[ehdrian]

4g93t is estimated to be around 9-10k, installation fee rm2k..

 

[tigger5251]

Ok, here's a solution......Need to spend abit $$$$....

Get 4G93 block -> Maybe RM1500-2000 (with custom paper)
Get Mivec head -> Also RM1500-2000
Rebore 4G93 block to 2000cc -> RM250
2000cc Pistons -> RM300-400
Get a 2nd hand piggyback -> RM800-900
Install + Tuning Piggyback -> RM250
Engine transplant fees ->1500+-

Total = 7000+- (Is gonna be a dang powerful N/A engine this one!)

And you have a powerful, reliable 2000cc mivec, but JPJ only inspect according to engine number, which is 1800cc. Then dont give a fark about mivec, single cam or dohc.

Engine number correct, it's a 1800cc, and from 1600-1800cc is A-Okay.....

Good luck

 

[boyzone]

Ok, here's a solution......Need to spend abit $$$$....

Get 4G93 block -> Maybe RM1500-2000 (with custom paper)
Get Mivec head -> Also RM1500-2000
Rebore 4G93 block to 2000cc -> RM250
2000cc Pistons -> RM300-400
Get a 2nd hand piggyback -> RM800-900
Install + Tuning Piggyback -> RM250
Engine transplant fees ->1500+-

Total = 7000+- (Is gonna be a dang powerful N/A engine this one!)

And you have a powerful, reliable 2000cc mivec, but JPJ only inspect according to engine number, which is 1800cc. Then dont give a fark about mivec, single cam or dohc.

Engine number correct, it's a 1800cc, and from 1600-1800cc is A-Okay.....

Good luck

2nd gen 93 block can rojak with 2nd gen mivec head?

 

[tigger5251]

find the putra 4g93 block n kahwin with the 4G92 Mivec head, alot on the streets!

 

[DanzEterna]

it will become mivec 1.8 lor....

 

[boyzone]

I knew that 1.8 mivec can be done on pre yr 95 ( 1st gen).
How about terbalik version ( post yr 95 ), still can rojak?

 

[tigger5251]

aduh, then u mah find the one can fit into 4g93 lar......

 

[CrankShaft]

watch this ...
_http://www.youtube.com/watch?v=GiickxCTO1Y
_http://www.youtube.com/watch?v=eJqxuduC_ns&feature=related

steammmmm......for the turbo lovers ...turn on your sound system / earphone loudly !!!!

 

[CrankShaft]

I think I will go for GSR 1.8 terbalik. Project A comming up soon. Do you guys think doing port and polish at the initial stage is good? or just drive the standard engine first for couple of miles then do port and polish? If you see the above video clips what is the sound comming from supra? Is it wesgate? air filter ? What a lovely sound comming from the monster.

 

[CrankShaft]

anybody hare knows where i can find a good half cut shops??

 

[CrankShaft]

Bros...

Just sharing info..last thursday i went to kedai potong suprizingly seeing the price for halfcut GSR terbo is 9K+++ and halfcut evo 4 is 7k+++ .....cool evo 4 much cheeper ....but endorsement very hard...

 

[GSR06]

eloo c-foos,

Thinking of transplanting engines for my waja.
Just need to know which one should be more suitable
Between evo4 or MIVEC 1.8 RS.

2. How much would the half cut costs for both engines.
3. Which is a good workshop for transplanting engines in KL?
4. Any issues to get JPJ endorsement for Evo 4 in Waja?
5. The power for both engines. Which is more beuty in terms of "Fast".

Go for Evo for Waja chasis...One of my friends has transplanted a 1.8GSR with what you call 'Tiptronic'.... sad to say the performance is not up to standard or expectation. But nowadays, not sure whether you could transplant an Evo....good luck in your project.

 

[ronaldinho_375]

Bros...

Just sharing info..last thursday i went to kedai potong suprizingly seeing the price for halfcut GSR terbo is 9K+++ and halfcut evo 4 is 7k+++ .....cool evo 4 much cheeper ....but endorsement very hard...

bro...
care to share which halfcut sell evo 4 for rm7k
can i contact u..
dis is my email/ym
[email protected]

 

[kumar22mostwanted]

yeah bro which kedai potong u go i also cari for halfcut now but so far all the prices i got dam expensive lah

 

[8229]

Bros...

Just sharing info..last thursday i went to kedai potong suprizingly seeing the price for halfcut GSR terbo is 9K+++ and halfcut evo 4 is 7k+++ .....cool evo 4 much cheeper ....but endorsement very hard...

bro, the price is like that, gsr is available to register to any compatible proton car and its still consider new halfcut, that why the price is more than evo4 halfcut. Endorsement is not very hard, but its cannot be register to 2.0, even money cannot buy the endorsement for now.

 

[nurburing]

hmmmm, have everyone thought of 2000cc mivec, possible ? Rebore 4g93 to 2000cc. Honestly I think turbo doesnt mean to be fast in every track, remember turbo got lag. Why not try a customade 2000cc mivec ? I sat inside 1.8 mivec rojak before and its very very fast 0-120kmh....serious fast to experience powerful G's !

 

[boyzone]

my foreman just ordered a CK mivec with auto tranny to put in Waja.
Halfcut is quoted RM7.5K.

 

[kumar22mostwanted]

hmm i have heard about knocking the engine number on the evo to 4g67
and from what ive heard its quite successful for endorement and also road blocks they say the scanner cannot even tell the difference coz they use the number from japan exactly the same as the original
anyone care to comment on this??im not 2 sure myself:rolleyes:

 

[jung_zai]

can us use gsk ck number for evo endorsement?