Mivec gearbox problem

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

deanengson

From Facebook
Joined
Sep 20, 2010
Messages
53
Points
508
I recently did a CJ4A Mivec swap into my ride, its a non-lsd gearbox.

Just now my car came up with this problem..

Hard to engage gear especially 1st gear when on a full stop, and then the gearbox makes some sounds when i fully press the clutch pedal, seems like the clutch isnt pulled completely..

and when i let go of the pedal, the pedal doesnt come up smoothly, it yanks roughly when i let go of it..

need help here :bawling:
 
to the sound when press the clutch, maybe this is a problem of the clutch bearing.

firstly, it could be a problem from the clutch pump either leaking or not bleeding properly.

secondly, try to check the clutch fork to push the bearing. either position or slip a little gritty

thirdly, maybe the problem of clutch cover. (clutch can not engage)
 
Yup, clutch bearing was destroyed.. ate my clutch springs, had to replace them.. running healthy again..
 
My mivec gearbox also got problem jor... Is hard to shift to 1 gear and 2... I planing to rebulit my gearbox..
 

A thread every 60 seconds


Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom