- Oct 17, 2008
- 111
- 3
- 1,518
iam new to RB machine..going to try it latter this month..So i have been to forums such as KC for some tips...this is what i stumble...Car detailer: Malaysia Car Detailing Guru presents "CAR PAINT CORRECTION HANDS ON" powered by detailien Quote from KC 'know your rotary is design to rotate clock wise - dont goes
against it start from left to right - from top to bottom place yr pad on the furthest left glide till the
furthest right glide down goes 1/2 pass on the 1st passes continue the rest & repeat
start the 1st pass at the lowest speed - for makita speed 1 then gradually moves up to speed 2 &
stay at speed 2 & back down to speed 1"
iam really confuse with the speed use for the technic 1-2-2-1 ...does this techic means we use 1-2-2-1 until the end ( if so from which part we maintain the 2 and go to 1 )..or just 1 from start to end..then we go to 2 start to end...2 again from start to end... lastly 1 from start to end... pics can be found at the link provided...hopefully all the sifu here can enlighten me ...thanks
against it start from left to right - from top to bottom place yr pad on the furthest left glide till the
furthest right glide down goes 1/2 pass on the 1st passes continue the rest & repeat
start the 1st pass at the lowest speed - for makita speed 1 then gradually moves up to speed 2 &
stay at speed 2 & back down to speed 1"
iam really confuse with the speed use for the technic 1-2-2-1 ...does this techic means we use 1-2-2-1 until the end ( if so from which part we maintain the 2 and go to 1 )..or just 1 from start to end..then we go to 2 start to end...2 again from start to end... lastly 1 from start to end... pics can be found at the link provided...hopefully all the sifu here can enlighten me ...thanks