fit oil cooler, oil temp and pressure 4G15

[abunawas]

hi i recently got a new project car a wira 1.5 manual in stock condition. i would like to add an oil cooler and gauges, oil pressure and oil temp.

can anyone recommend a good shop that can fix all this for me?

the oil cooler is maybe not needed for now, but i may change the engine later when budget allows, for now i just want the oil cooler and gauge.

i checked mudah , a lot selling the cooler and relocating kits from half cuts, but i am not sure if they will fit?

the 4G15 use similar connection to other cars for the filter?

thanks.

 

[Izso]

Half cuts I don't know. But I know most if not all general fit-all coolers will fit the 4G15. Works, Hayden all will fit if your adaptor is purpose fit for the 4G15.

 

[abunawas]

thanks for the reply. i will start shopping around. will look at a suitable adapter or maybe they come in kits too. with so many 4g15 fitted already i think they should be very common.

 

[ken yeang]

some new kits come together with adaptors.....

Half cut items dont usual comes with adapters

 

[abunawas]

thanks.

guys, those with 4G15 fitted with oil temp and pressure, mind sharing what your readings are? mine is stock, so i need a baseline just to see if my engine is in good health?

 

[Izso]

Erm... oil press at cold is 80 and warmed up about 20 I think. I need to check again. Oil temp when hot is about 98 and cold is just ambient temp.

 

[stupidcar]

Erm... oil press at cold is 80 and warmed up about 20 I think. I need to check again. Oil temp when hot is about 98 and cold is just ambient temp.

All these readings taken from OBD 2? Or somewhere else?

 

[abunawas]

Erm... oil press at cold is 80 and warmed up about 20 I think. I need to check again. Oil temp when hot is about 98 and cold is just ambient temp.

thanks man. any pics of your setup? you fitted oil cooler also?

 

[Izso]

All these readings taken from OBD 2? Or somewhere else?

I have the meters mah. So the readings taken directly off my engine.

thanks man. any pics of your setup? you fitted oil cooler also?

No oil cooler. I don't run the car hot enough to need an oil cooler.