All about Vantex/Mantex/HSP/HY/HL/Clone RC Cars...

[Jin_Jat]

i tink all points to the 416 clone for now...i tink i might start with that.

btw, can 416 be modded to do CS?

thx man...u've been a great help to me! cheers

Of course, but u have to mod the belt tension and im not sure how to do it on the 416. u could go to some r/c forums and ask over there on how to do it. basically the belt driven chassis is easier to do the CS mod by reducing the rear diff ratio so that u can gain acceleration and for the front diff u can either mod another diff for it or change the pulley into higher ratios, considering u have bought the front 1 way differential system. the rear belting should be tension enough so that the rear diff can pull it with maintained stability. thats y u should get(buy) or mod a belt tension from another brand if tamiya doesnt have it...Its not really complicated to do the mod when u are already familiar with ratios and tensions...CheeRS!

 

[bullet_nos]

wah...i've got a lot to learn...ok, once i get a kit for myself, i'll keep u posted here! thx mate!

Cheers

 

[Jin_Jat]

No problem bro, Im also excited about u having ur own kit, then u can get to business all the way...and remember to check out r/c forums in Malaysia and other countries too...there are useful tips and recommendations for newbies...from there u can make better choices by narrowing down few of low rated products...anyway i hope u get ur best choice kit...i support new r/c drifters all the way...

 

[jack_lee]

Wow....this is such a good thread to me as i'm also wondering which china brand to buy to re-start my r/c hobby life.thanks guys,these are really helpful info for beginner in rc drifing.

i used to drove a nitro team magic b4.but it's back to 2007.I even tried to drift it with my diy poly pipe drift tire....

I'm really in the mood of rc drifting now...the clone 416 chassis...haha...finally i got something to aim.got to look for the cheap seller first who can supply the necessary replacement/option part.

enjoy~!

 

[AD_EG]

Thank you sifu Jin Jiat for sharing your knowledge.

You have been very helpful.

I too am looking into joining this new world of RC drifting since i cant afford the real deal. hahahah

I narrowed down my choice to HPI E10. Cause of the interchangeable motor which can be a touring layout or drift layout. But would like to know your input.

From what i read you recommend to get clones...Any idea where we can get clones?

And can all other cars also change layouts? from drift to touring?

My budget is max Rm700, but cheaper the better. Preferably i would like something fast. when i look at the videos of the HPI e10 looks pretty slow....how much would an upgrade of the motor costs?

 

[DanzEterna]

if on a bajet, id recommend go for vantex 416 (red alluminium chasis), if blue chasis (rm299) but pariah motor le...,red comes wid std 24T motor rm399....
if CF chasis maybe slightly higher pricing.
vantex parts are quite cheap compared to HPI...etc........

 

[AD_EG]

you referring to this one ah bro?

http://www.rcdreamz.com.my/webshaper/store/viewProd.asp?pkProductItem=1662

Is this fast? im looking for something fast and fun....not for competition, just for personal use and syiok sendiri.

---------- Post added at 11:30 AM ---------- 6 hour anti-bump limit - Previous post was at 11:30 AM ----------

bro danz can recommend me a place that has a variety of vantex products?

---------- Post added at 11:36 AM ---------- 6 hour anti-bump limit - Previous post was at 11:30 AM ----------

i saw another one that says Vantex 4wd Sprint 416TC. Its a purple chassis.

http://www.fgmhobby.com/rc_malaysia/index.php?main_page=product_info&cPath=33&products_id=390

Is this good? it cost Rm450

 

[DanzEterna]

yeah bro thats the 1...
but havent seen purple chasis before, normally blue (rm299) or red (rm349) or (rm399)
its good for beginer...normally for vantex, std with 24T motor, the most expensive is rm399..
i dunno y they selling at rm450...maybe they marked up abit...

ok are u familiar wid ampang waterfront area? overthere got old town kopitiam & sato accs shop...

 

[AD_EG]

is the 24t motor fast? cause from what i understand higher turns means more torque.

i would like to have a nice balance. so that if i don feel like just playing drift, i can just race the car.

if i were to put a faster motor (less turns) lets say 18T motor, would that make it difficult to drift?

 

[DanzEterna]

the 24T motor kira std....the lesser it is the faster the motor is....
for beginners, 9T motor shoud be fast enuf & able to drift.....if u want faster 5.5T or 3T, that 1 can outrun EX5 already...damn fast.....but overheats fast......not recommended....

 

[AD_EG]

ok ..now to get the 9T motor upgrade.

i need to get a 9t combo set right? together with ESC.

And also along with that, i need to get a lipo pack battery ? (higher the MAH the better?

And also if i upgrade the motor, i must change my gear ratio as well?

Sifus please correct me if im wrong

 

[DanzEterna]

ok i dont know much bout RC, but only some info.
9T motor + ECS bout rm300-320..
LIPO batt rm150 + lipro fast charger rm100-140
not sure bout the gear ratio...

 

[teekean]

dear sifus,

how bout Team magic compare to vantex? price do differents a lot but what bout in terms of performance & parts availability?

Team magic
Team Magic E4D RTR M3 - RC Car

Vantex
Ventex 2.4G Alloy RTR - RC Car

 

[calvin9683]

just got my team magic E4D last weekend....
i'm also a newbie for rc drift....
initially wanted to get vantex.... but the shop owner suggested me to get tamiya or team magic.....
end up decided on team magic for RM750.... a li po batt for RM130.... n a fast charger at RM129.... still haven really tried it except in my living room....
had changed to touring tyres n test its speed outside my house.... its considered fast enough to me.... n response r good!!!!!

 

[DanzEterna]

whoa real car also mod, RC also mod........but wattudu its a hobby rite...
i also was into RC last time cos my bros in law all had 1 each..but i didnt manage to buy in time...last2 all stop playing edi...haha luckly i didnt buy any......

 

[calvin9683]

lolz... i'm in love wif anythin wif 4 wheels n lowered....
tryin to get evo3 bodyshell for my E4D.... heehee

 

[DanzEterna]

like this 1 ah.

 

[calvin9683]

Tis is super awesome!!!!

 

[Viera Sasaki]

like this 1 ah.

Awsome pic dude! Mine still using the old R32 body shell.