Port And Polish...with minimum cost..

[vtec_mivec]

Wanted to Port and Polish(PnP) your engine with a minimum cost and a quality job/service???

We provide a very quality port and polish services and including the fuel setting after the PnP proscess.Since it is the promotion month(since we just shifting to this new place),the service charge is one of the cheapest in town....:shocked:......this is including:-

i)take out the engine head,clean all the carbon inside the head.

ii)porting the intake,exhaust and the intake manifold(this is done with a very
precise measurement according to the engine model).If this is done

wrongly,such as porting it too big or too small the engine power output will

drop.

iii)valve grinding

iv)clean again the engine head before fix it back

v)fix the engine head back.

After the PnP process u will need to setting back your fuel supply.We guarantee u will feel the different after the PnP process.

Our "favourite" :angel_smile: engine to PnP are:-

Honda: b16a,b16b,b18c....etc.

Mitsubishi: 4G63T(Evo),VR4, all the 4G9X series, 4G61T,4G61(NA).....4g13....4g15.....4g18....etc...

Mazda: B6 Turbo/NA.....B8 Turbo/NA...

Nissan: rb series....sr20.....ca18....turbo or NA....etc.....

Toyota: All model....any kind..4 throtle..Silvertop..Blacktop....Supercharger...etc..

DAIHATSU: L2s....L5s....turbo or NA.....g100...detomaso....etc....

Other model also are welcome...

Our quality of work is guarantee...see the pic below....PnP job to EG9( b16a), 3sgte from toyota celica and 4g93P from Satria GtI:-

Yahoo! Photos - vtec_mivec's Photos - ABCD00011

Yahoo! Photos - vtec_mivec's Photos - ABCD0003

Yahoo! Photos - vtec_mivec's Photos - ABCD0005

Yahoo! Photos - vtec_mivec's Photos - 2006-09-15

Yahoo! Photos - vtec_mivec's Photos - ABCD0001

Yahoo! Photos - vtec_mivec's Photos - ABCD0007

Yahoo! Photos - vtec_mivec's Photos - ABCD0008

Yahoo! Photos - vtec_mivec's Photos - ABCD0010

Yahoo! Photos - vtec_mivec's Photos - ABCD0002

Yahoo! Photos - vtec_mivec's Photos - ABCD0007

Yahoo! Photos - vtec_mivec's Photos - ABCD0001

Yahoo! Photos - vtec_mivec's Photos - ABCD00012

Yahoo! Photos - vtec_mivec's Photos - ABCD0007

Yahoo! Photos - vtec_mivec's Photos - ABCD0001a


=======Since a lot of request,we will extend our promotion until ==========================



NOW THE PROCESS CAN BE MORE FASTER



WE ALSO PROVIDE A VERY LOW PRICE FOR SERVICE CHARGE IN :-
i)TOP OVERHAUL OR A MAJOR OVERHAUL
ii) CLUTCH PLATE REPLACEMENT SERVICES
iii)HALFCUT INSTALLATION
iv)TIMING BELT

 

[patpaty]

bro..qoute me the price for b16a head...will it increase hp nor torque

 

[b00n]

bro...quote me the price for Lantis 1.8cc

 

[clavenk]

quote me how much for pnp 4g92p

 

[hitz]

how much for 20V silvertop?

 

[n3sta_n_roses]

how about daihatsu's breed? :_:

 

[vtec_mivec]

all daihatsu from...... gtti...l2s....l5.....are welcome

 

[n3sta_n_roses]

this workshop has a very great workmanship...honestly..the result is great :_:

 

[vtec_mivec]

thanks....

 

[g88]

PM me price to P & P 4G93 and 4G15 carb with installation/uninstallation labour and without installation/uninstallation

 

[b00n]

sorry bro; ur mail box full d....

thanks for ur PM but further question.
1) Can direct me if I'm coming using MRR2 from Melati towards Batu Caves.
2) how many days to complete
3) If I want to re-bore; can you help source for ngam piston, oil seal blah blah....?

most probably would have to wait for the next pay day if gonna do.

 

[sphynx]

ya ya the workmanship really satisfying

 

[axcrow]

for lantis 1.6 NA how much??

 

[adamshahm]

ya ya the workmanship really satisfying

Hola sphynx, mlm ni ko xlepak shah alam ke? Ape cer? dh main turbo ke?
Cheers.....
:regular_smile: :regular_smile: :regular_smile:

 

[cooljas]

After ur PnP do u use flow bench equipment to test the airflow whether the flow is smooth in every part tat u have ported?Thanks

 

[vtec_mivec]

u dont have to worry about the ported surface whether it is smooth or not....because it is more smoother than u can imagine....even a single water drop cant stay on the surface because of the smoothness...hehehe...

 

[lampakia]

bro..how much u all charge for 4g91?

 

[aem1354]

daihatsu L200 12V how much?

 

[ja50n]

how much got 4g63T and how long it takes.

 

[kayy]

bro..pm me for levin blacktop
-how long?
-how much?
-engine retune,balancing and blueprint also done?