oil filter

kaninbu

500 RPM
Senior Member
Dec 2, 2008
669
104
1,543
KL
original oil filter for airtrek cost rm40
proton original rm15

which will u use if u are alwiz chg engine oil at 5000km?
 

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
I used both Proton and original Mitsu before... I don't know what is the difference. I change oil at 7500km for fully sync, no problem or what so ever.

---------- Post added at 01:55 PM ---------- 6 hour anti-bump limit - Previous post was at 01:54 PM ----------

So I mean, u can use Proton one... but make sure it's original.
 

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
Nope... I use only Mobil1... .. been using it like over 10 years now. Last time, I tried Shell Helix Ultra, Havoline, Petronas Syntium... all not too bad (fully sync)... just that Mobil 1 always got gifts... so I bought a lot at 1 go. Especially the Porsche 1:18 model cars.. I have quite a few.. hehehe..
 

kaninbu

500 RPM
Senior Member
Thread starter
Dec 2, 2008
669
104
1,543
KL
actually i find 4g63 very troublesome.4.5l of engine oil.where as market all selling 4l.need to buy another 1l sumore.
 

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
Yes... so usually I buy 3 X 4L bottles at one go... then kept saving the additonal one after sometime, it will be a full one for the next oil change. Another reason why I remain 1 type/brand.
 

kaninbu

500 RPM
Senior Member
Thread starter
Dec 2, 2008
669
104
1,543
KL
do u have tappet noise problem in the morning using mobil1?
 

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
err..... I never go and notice when it's cold and hot wor... I just start, warm up 60 secs and time to go already.
 

kaninbu

500 RPM
Senior Member
Thread starter
Dec 2, 2008
669
104
1,543
KL
morning start engine abit noisy later it become more quiet?
 

stutzedward

3,000 RPM
Senior Member
May 27, 2009
3,416
561
1,713
KL
Airtrek can use the same filter from Proton. But make sure you buy the 'shorter' ones cos taller ones may result in hitting the ground when going thru speed bumps or if you have TD05, it will rub against the turbo.
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
may i know if proton filter is using which type proton car filter? wira?
Proton filter height is standard. Only difference is size, there's two types. big and small. Wira uses the big one, most other protons is small one
 

Random Post Every 5 Minutes



This week is a pretty busy week. Super GT weekend starts soon and everyone is going to be busy preparing for the event. So there wouldn't be much updates for the project, as I have to discuss with my sponsors on what needed to do. But then again, I've dreamed up some great concepts. Check out the photo up above. It came from a 1970's Datsun Z432. What is a...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience