Myvi brakeset for your stock kenari & kelisa :)

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
must make sure this thread clean and healty...
uncle tohsan..
tomorow i will meet djerm and go to your brother house together...so wan to join us?
 

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
hehe...so hows the brake....hope to fix my so that can test when i drive down from cameron higlands
 

butthead

2,000 RPM
Senior Member
Aug 12, 2004
2,910
3
3,138
kelisa6009 said:
must make sure this thread clean and healty...
uncle tohsan..
tomorow i will meet djerm and go to your brother house together...so wan to join us?
hahahha..spoke to soon...here i come to make it dirty...hahaah..jus joking lar..

i dunno much about MyVi details...but tohsan is right bout long term lar...RM40 and RM200 is damn heck of a lot...change 3 times already can buy a set of L9...

MyVi disc got ventilated one ar??? so the caliper also change ??? how bout the mounting place for the caliper...jus asking ...
 

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
heheh..all can just PnP.....i already got my install
tomorow will post up some picture...
 

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
DJgErM said:
calipers must change...but all the mounting is the same i guess..and its like dual disc..and that is the vented part....
leng chai...i already fix my...but damn long leh..take 2 hour ti fit the thing..got leakage....lucky all can be done....so tonite i will go and see u fix...meet u there...can take few picture to promote for Ah moon
 

Tohsan

Over 10,000 RPM!
Senior Member
Thread starter
Nov 13, 2004
17,881
51
3,148
Char Kuoy Teow
Kai Meng & Djgerm

Kam sia for the support on behalf of Moon. Paiseh bout wasting another precious hours of your to be share with your gf. Well,brake is a very importance basic safety element of the car,so it cannot be compromise as stress by Ah Moon. Just wanna make sure you are really safe using the new brakeset.

Hopefully the picture will be uploaded as soon as possible. Thanks.

Butthead taiko

Ya! The disc is ventilated in between the two disc that stick next to each other. Btw u can sent the disc for drilling for more holes to get extra ventilation also which Moon already done to his disc. Grip wise on the disc is more improvement,but that also must be complement by good rubber which is equally importance to have good grip overall. We can't totally depend on the brake. Thats why i advise Kai Meng to change his tyres as soon as possible.

I think for you any brake is good enough as long as u have the titanium balls n stock rubber :biggrin:
 

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
uncle tohsan

today i kena call in her(BOSS) room and kena makan few peanut...mahai..everyday breakfast peanut can die...
 

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
nono...i wan to compare myvi brake and L9 brake...wan to see which wan better responce.....
 

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
uncle tohsan

how the pil kuda ur bro give to us....ada working ah?
 

Tohsan

Over 10,000 RPM!
Senior Member
Thread starter
Nov 13, 2004
17,881
51
3,148
Char Kuoy Teow
Kai meng

the pil kuda for our car got ready stock ma,just inform moon how many u need.

i feel the engine run more smooth n less vibration in fact, the actual result can feel it instantly during high rev,but for actual data on how many percentage of increase of hp,i need to sent your car for dyno and show the guys here.

btw what happen in office? can tell me ah? maybe u might need the lil cannon pointing at her instantly :)
 

kelisa6009

Over 10,000 RPM!
Senior Member
Nov 20, 2003
17,144
40
3,148
Penang Kia
Tohsan said:
Kai meng

the pil kuda for our car got ready stock ma,just inform moon how many u need.

i feel the engine run more smooth n less vibration in fact, the actual result can feel it instantly during high rev,but for actual data on how many percentage of increase of hp,i need to sent your car for dyno and show the guys here.

btw what happen in office? can tell me ah? maybe u might need the lil cannon pointing at her instantly :)
haha..long story lar..tonite i tell u bedtime story lar...working here is like going to war...suddenly u sit in your place at the back got one time bomb...exploded u kena kaw kaw....

i also tested that thing..good when high rev...i like it..maybe i will chaneg job, sell pil kuda already....
 

butthead

2,000 RPM
Senior Member
Aug 12, 2004
2,910
3
3,138
Tohsan said:
Kai Meng & Djgerm

Kam sia for the support on behalf of Moon. Paiseh bout wasting another precious hours of your to be share with your gf. Well,brake is a very importance basic safety element of the car,so it cannot be compromise as stress by Ah Moon. Just wanna make sure you are really safe using the new brakeset.

Hopefully the picture will be uploaded as soon as possible. Thanks.

Butthead taiko

Ya! The disc is ventilated in between the two disc that stick next to each other. Btw u can sent the disc for drilling for more holes to get extra ventilation also which Moon already done to his disc. Grip wise on the disc is more improvement,but that also must be complement by good rubber which is equally importance to have good grip overall. We can't totally depend on the brake. Thats why i advise Kai Meng to change his tyres as soon as possible.

I think for you any brake is good enough as long as u have the titanium balls n stock rubber :biggrin:
heck lar...i always hope for some mods...but then money is always the problem...hehhehe

RM600 won't be much considering a set of project Mu L9 rotors cost like RM900 per pair...

wat is this pill kuda anyways...seems like Shell is gonna have some competition soon...
 

Kelisa R - MJz

Known Member
Senior Member
Feb 24, 2004
366
1
3,018
^_^

Oh...:Not_Impressed:

Why don't install Alcon 12piston braking system??

More nice look...
 

butthead

2,000 RPM
Senior Member
Aug 12, 2004
2,910
3
3,138
Kelisa R - MJz said:
Oh...:Not_Impressed:

Why don't install Alcon 12piston braking system??

More nice look...
brake cover is it...where got people make???

if like that i want AP Racing lor...
 

Random Post Every 5 Minutes

Can somebody please let me know what are the steps involved when I comes to painting a car.. i hear there are 3 steps involved...but not so sure what they are..can anybody help me?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience