Dear All,
My latest offering are as follows:
- Coilover springs installation and modification into non Coilover dampers - RM50 each dampers
- Dampers servicing (replacement of Hydraulic Oil and seals) - RM50 each dampers
Coilover Springs available:
TITAN 2, 3, 4, 5, 5.5 and 6Kgs - RM80 each NEW!
Hydraulic Oil used:
- Castrol High Pressure RM10 for two dampers
- Motul Sports/Competition RM30 for two dampers
Options:
You can send your car to me and it will take half day to complete. This way removal and installation will be charged at RM10 for 1 absorber. Or it will be better if you just simply send me your absorbers and of course no charge will be inccured.
Applicable to:
Any absorber/dampers that uses bolt type screw at the body to hold the shaft like Corolla/Levin/Trueno AE111 and AE101 Japanese dampers.
Note:
If you go for Coilover Spring mod, it will not be height adjustable - just that I will modify the "plate" holding the springs to accomodate small diameter coilover springs. And height will be set at preffered length during the modification itself. Advance appointment is required before you send in the dampers.
Important NOTE!:
Applicable to all Oil and Oil+Gas dampers only. Gas dampers cannot. For Oil+gas dampers it will be 100% Oil damper after servicing - and I can confirm that the result will be quite satisfactory even with Oil only (I am using a set now)
For more info just call me at 012-240 7780
My latest offering are as follows:
- Coilover springs installation and modification into non Coilover dampers - RM50 each dampers
- Dampers servicing (replacement of Hydraulic Oil and seals) - RM50 each dampers
Coilover Springs available:
TITAN 2, 3, 4, 5, 5.5 and 6Kgs - RM80 each NEW!
Hydraulic Oil used:
- Castrol High Pressure RM10 for two dampers
- Motul Sports/Competition RM30 for two dampers
Options:
You can send your car to me and it will take half day to complete. This way removal and installation will be charged at RM10 for 1 absorber. Or it will be better if you just simply send me your absorbers and of course no charge will be inccured.
Applicable to:
Any absorber/dampers that uses bolt type screw at the body to hold the shaft like Corolla/Levin/Trueno AE111 and AE101 Japanese dampers.
Note:
If you go for Coilover Spring mod, it will not be height adjustable - just that I will modify the "plate" holding the springs to accomodate small diameter coilover springs. And height will be set at preffered length during the modification itself. Advance appointment is required before you send in the dampers.
Important NOTE!:
Applicable to all Oil and Oil+Gas dampers only. Gas dampers cannot. For Oil+gas dampers it will be 100% Oil damper after servicing - and I can confirm that the result will be quite satisfactory even with Oil only (I am using a set now)
For more info just call me at 012-240 7780