RACETECH MOTORSPORT
Known Member
Aluminium Manifold Throttle Body Spacers
Product Description :
-Made of High Quality Silicone
-For High Temperature and High Boost Application.
-3-Ply Nylon for Strong Reinforcement
-Withstands Operating Temperatures from -65F to 500F Degrees Fahrenheit
-Working pressure 85 PSI / Burst pressure 245 PSI
Features :
A throttle body spacer is usually a 1-inch (25 mm) thick piece of metal that is bolted to the inlet of the throttle body downstream of air flow into the manifold. By changing the airflow, this after-market add-on does claim to be a performance enhancing accessory that can increase an engine's horse power, torque and fuel economy. It functions by swirling or directing the air flow to maximize air volume to the manifold. There is much debate about the veracity of the manufacturers claims for these devices. The general consensus is that it works well on some engine configurations, and not at all, or adversely on others.
Please click link below to find out more about this product :
<iframe width="560" height="315" src="//www.youtube.com/embed/Jh6yopRwOlw" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="//www.youtube.com/embed/L8FLKZmgZjM" frameborder="0" allowfullscreen></iframe>
Car List Application :
Ford Fiesta 1.4/1.6
Honda CRZ
Honda City 2007-2014
Honda Insight
Honda Jazz GD/GE
Honda Civic K Series
Honda Civic D Series
Honda Civic B Series
Nissan Latio 1.6
Mitsubishi Lancer GT
Proton Inspira
Proton Persona Campro
Proton Gen2 Campro
Proton Waja Campro
Proton Satria Neo Campro
Proton BLM Campro
Proton Wira 1.3/1.5/1.6/1.8
Proton Satria 1.3/1.5/1.6/1.8
Proton Putra 1.3/1.5/1.6/1.8
Suzuki swift 1.5/1.6
Toyota Vios 08
For More Information About This Product
Call / SMS : 018 - 2764 110
Please Visit Our Workshop / Showroom at :
(Opposite Balai Polis Pandan Perdana)
5GM Jalan Perdana 6/8
Pandan Perdana
56000 Kuala Lumpur
Working Hour Mon~Sat : 10:30am - 7:00pm
Product Description :
-Made of High Quality Silicone
-For High Temperature and High Boost Application.
-3-Ply Nylon for Strong Reinforcement
-Withstands Operating Temperatures from -65F to 500F Degrees Fahrenheit
-Working pressure 85 PSI / Burst pressure 245 PSI
Features :
A throttle body spacer is usually a 1-inch (25 mm) thick piece of metal that is bolted to the inlet of the throttle body downstream of air flow into the manifold. By changing the airflow, this after-market add-on does claim to be a performance enhancing accessory that can increase an engine's horse power, torque and fuel economy. It functions by swirling or directing the air flow to maximize air volume to the manifold. There is much debate about the veracity of the manufacturers claims for these devices. The general consensus is that it works well on some engine configurations, and not at all, or adversely on others.
Please click link below to find out more about this product :
<iframe width="560" height="315" src="//www.youtube.com/embed/Jh6yopRwOlw" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="//www.youtube.com/embed/L8FLKZmgZjM" frameborder="0" allowfullscreen></iframe>
Car List Application :
Ford Fiesta 1.4/1.6
Honda CRZ
Honda City 2007-2014
Honda Insight
Honda Jazz GD/GE
Honda Civic K Series
Honda Civic D Series
Honda Civic B Series
Nissan Latio 1.6
Mitsubishi Lancer GT
Proton Inspira
Proton Persona Campro
Proton Gen2 Campro
Proton Waja Campro
Proton Satria Neo Campro
Proton BLM Campro
Proton Wira 1.3/1.5/1.6/1.8
Proton Satria 1.3/1.5/1.6/1.8
Proton Putra 1.3/1.5/1.6/1.8
Suzuki swift 1.5/1.6
Toyota Vios 08
For More Information About This Product
Call / SMS : 018 - 2764 110
Please Visit Our Workshop / Showroom at :
(Opposite Balai Polis Pandan Perdana)
5GM Jalan Perdana 6/8
Pandan Perdana
56000 Kuala Lumpur
Working Hour Mon~Sat : 10:30am - 7:00pm
