Dyven Long
Known Member
HELIX E10 Esprit
Digital mono amplifier with active lowpass, adjustable from 40 Hz - 150 Hz, bass boost 0 - 18 dB and phase control, external bass remote control; all connectors are placed just on one side
Colour: black
- RMI (Real Mixed Input) for forming an optimised
mono-summation signal from the left and right channels
- Integrated electronic crossover
- 4.0 volt / 6.0 volt inputs for connection to any signal source
- Switched power supply unit for output performance of generously
dimensioned proportions within the smallest spaces
- Intelligent noiseless on/off switching for the prevention
of pop noise, even when various units are interconnected
- Smart protection electronics for overheating, overvoltage
and voltage drop
- Separate speaker protection circuit with current
limitation for speaker short circuiting, cable contact
with the car body, low impedance and faulty connection
- Printed circuit board copper-plated on both sides for maximum
quality of power and signal transmission and protection against vibrations
-1% accurate components for perfect sound quality
- solid connection terminals for loss-free signal and power transmission
- CPS (Colour Protection System) diagnostics system
- Temperature-optimised heatsink of SiAl alloy for the
best possible consistency of performance
E 10
4 ohms at rated power 1 × 400 Watts RMS
2 ohms at rated power 1 × 600 Watts RMS
1 euro nominal power 1 × 750 Watts RMS
Frequency response 27Hz-150kHz
Total harmonic distortion <0.1%
Transient Intermodulation Distortion <0,02%
SNR> 90 dB
Input Impedance 20 kOhms
Input sensitivity 0,3-6.0V
Insurance 4 × 20A
(Height × length × width) in mm 58 × 395 × 217
Weight 3.5kgs
-Condition:New (No Box & Manual)
-Model:E10
-Price:rm1680 negotiable
-Contact: Mr.Long (Yang)
-Mobile: 016-3615292
-WeChat id:Dven8989
Digital mono amplifier with active lowpass, adjustable from 40 Hz - 150 Hz, bass boost 0 - 18 dB and phase control, external bass remote control; all connectors are placed just on one side
Colour: black
- RMI (Real Mixed Input) for forming an optimised
mono-summation signal from the left and right channels
- Integrated electronic crossover
- 4.0 volt / 6.0 volt inputs for connection to any signal source
- Switched power supply unit for output performance of generously
dimensioned proportions within the smallest spaces
- Intelligent noiseless on/off switching for the prevention
of pop noise, even when various units are interconnected
- Smart protection electronics for overheating, overvoltage
and voltage drop
- Separate speaker protection circuit with current
limitation for speaker short circuiting, cable contact
with the car body, low impedance and faulty connection
- Printed circuit board copper-plated on both sides for maximum
quality of power and signal transmission and protection against vibrations
-1% accurate components for perfect sound quality
- solid connection terminals for loss-free signal and power transmission
- CPS (Colour Protection System) diagnostics system
- Temperature-optimised heatsink of SiAl alloy for the
best possible consistency of performance
E 10
4 ohms at rated power 1 × 400 Watts RMS
2 ohms at rated power 1 × 600 Watts RMS
1 euro nominal power 1 × 750 Watts RMS
Frequency response 27Hz-150kHz
Total harmonic distortion <0.1%
Transient Intermodulation Distortion <0,02%
SNR> 90 dB
Input Impedance 20 kOhms
Input sensitivity 0,3-6.0V
Insurance 4 × 20A
(Height × length × width) in mm 58 × 395 × 217
Weight 3.5kgs
-Condition:New (No Box & Manual)
-Model:E10
-Price:rm1680 negotiable
-Contact: Mr.Long (Yang)
-Mobile: 016-3615292
-WeChat id:Dven8989
