AE Detailers at Your Service.

Car Shops and Services

AE Detailers at Your Service.

SP|D3RMaN

Known Member
Senior Member
Joined
Nov 11, 2008
Messages
213
Points
1,518
AE Detailers. Premium Quality Detailing Services in Johor

Hi guys.
Name's Adrian from JB.
I'm offering free lance quality detailing services in JB and would be honored to provide my services for all the car lovers out there in this forum.

Charges for my services are as follow
1.Engine Wash + Dressing (starting RM50)
2.Car Wash + Claying + Waxing (starting RM150)
3.Car Wash + Claying + Waxing (2coats) (starting RM180)
4.Car Wash + Claying + Polishing + Waxing (2 coats) (starting RM350)
5.Car Wash + Claying + Light Compounding + Polishing + Waxing (2 coats) (starting RM500)
6.Car Wash + Claying + Heavy/Light Compounding + Polishing + Waxing (2 coats) (starting RM650)

I could be contacted through my email at [email protected] and at the same time feel free to view my finish projects at my website http://aedetailers.multiply.com

If you have any queries need answer too, do let me know.
Also, I am happy to assist anyone out there regarding anything from paint correction to paint protection, interior cleaning to engine wash.

Cheers
Adrian aka SP|D3RMaN
 

Attachments

  • Test4.jpg
    Test4.jpg
    23.4 KB · Views: 894
Last edited:
Perodua Kelisa '03 (White)

Hi guys.
This is my previous work on a bang up Kelisa. Wanted to see how much difference i could make to the car exterior.

Started with Tar Remover
Then clayed the whole car (used up 2 bars)
M86+Twisted Pool Pad 1200rpm (my favorite combo at the moment)
M82+8002 Polishing Pad at 800rpm - 1500rpm

Picture of the engine bay
Kelisa01.jpg


Red paint transfer on front right hand door
Kelisa02.jpg


Duct Tape Residue from 1 year ago !!!
Kelisa03.jpg


Yellow paint transfer on rear side just before tail lamp
Kelisa04.jpg


Tar / Mud / Shit (?) and dunno what else .....
Kelisa05.jpg


Too much rain and never wash ... oxidised paint
Kelisa06.jpg


Engine Bay with Hood
Kelisa07.jpg


Engine Bay with hood 50/50
Kelisa08.jpg


Tar ....
Kelisa09-1.jpg


More Tar ....
Kelisa10.jpg


More and more tar ....
Kelisa11.jpg


What else but .... tar ....
Kelisa12.jpg


Don think i need to repeat anymore .... tar ....
Kelisa13.jpg


Wet sanding with 1500 grit sandpaper on the red paint transfer
Kelisa14.jpg


After picture with M86+ Twisted Wool Pad
Kelisa15.jpg


Wet sanding with 1500 grit sandpaper on the yellow paint transfer
Kelisa16.jpg


After picture with M86+Twisted Wool Pad
Kelisa17.jpg
 
A Cleaner Engine Bay
Kelisa18.jpg


Some Deep Scratches around the engine bay
Kelisa19.jpg


After Correction
Kelisa20.jpg


Remember the duct tape residue from 1 year ago ? This is after !
Kelisa21.jpg


The finish product on the Yellow paint transfer
Kelisa22.jpg


A view on a clean up door panel
Kelisa23.jpg


Close up on the door key hole
Kelisa24.jpg


Remember the tar covered bottom panel ?
Kelisa26.jpg


Tar ? What Tar?
Kelisa25.jpg


This is on the left hand side.
Kelisa27.jpg


A Cleaner Engine Bay with a Cleaner Hood
Kelisa32.jpg


Some Reflection Shots over the finish product !
Kelisa29.jpg


Kelisa28.jpg


Kelisa30.jpg


And last but not least , a whiter and clean Kelisa.
Kelisa31.jpg


Critics are most welcome.
Thanks !
 
Last edited:
just wondering.. did u adjust the picture brightness & contrast for the 'after' pics
Frankly, i'm a newbie with camera.
I'm using a PnS camera and just hope to get a good quality picture out of it.

Mind to tell me, is there anything wrong with it?
Or can you teach me a trick or two?
 
nothing.. im quite noob myself too at this.. anyways really like wat ure doing here.. one of my frens also started like u long time ago n, now he had his hands on many ferraris n still a freelancer. hope yr kungfu will be better in the future. good luck at yr biz n all the best.. cheers dood. free buyp! bring up yr post
 
Thanks for the compliments FoarGeez.

This is on a Mazda3 engine bay.
As the owner was a fanatic for lighting, he had lots of wires which prevented me from doing a wet wash inside the engine bay.
This is my term of 'dry cleaning'. Using cloths and chemicals to clean up the engine bay.
Cheers

Before
11.jpg


After
12.jpg
 
Respect u for what u do.Free BUMP for you!
No KL buddy with same experience and same determination as u kah bro?
 
Respect u for what u do.Free BUMP for you!
No KL buddy with same experience and same determination as u kah bro?

Thanks for the free Bump Bro !
I do have some buddies in KL but most of them are into DIY'ers.
I'll talk to them and hook you up if you wish too.
:)
 
Christmas. New Year. Chinese New Year.
So many festivities are coming. Get your ride as sparkling clean as possible.
Be the envy of your friends.
Call/Email me to make an appointment so i can give a no-strings-attached review on your paint condition and suggestions to make it better.
Cheers
Adrian
 

A thread every 60 seconds


Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom