custom made and ready made car body stickers! **album updated**
- brand new item
- suitable apply for both indoor and outdoor
- vinyl type - ORACAL,3M,AVERY
- stickers color and size are editable
- sticker price start from RM4 onward
- payment can be made by maybank,public bank and CIMB
- post by pos laju or pos ekspress only (postage by buyer)
- discount will be given for bulk order
- available for custom made design,if low order quantity will charge for artwork fees
- artwork fees start RM5 onward,depend by the design difficulty
- do not hesitate to contact us via pm or phone if you have any further questions
- we will not be responsible for any damages or losses occurred during the delivery
- please click album below for individual stickers viewing (album will keep updated)
Pictures by stickersnation - Photobucket <-- click here
car body decals and mixed designs pictures by stickersnation - Photobucket <-- click here
https://www.facebook.com/pages/vector-art-stickers/273466079361059 <-- facebook click here
Contact info:-
- hp - 016-7028669 (sms or call)
how to apply sticker:-
dry method apply (for small sticker or simple design):
1) Clean the sticker application area to remove any grease or dust particles that may prevent the sticker from sticking to the surface,
2) Make sure the apply area surface are dry and clean,then peel away the backing and apply the sticker with the transfer tape,
(when peeling the backing make sure the entire sticker are stick with the transfer tape,if not,stick back the tape and peel again until complete)
3) Once it is correctly positioned,using credit card or something similar to squeeze out the trapped air,remove the transfer tape and you are done,
4) Don't wash the application area within 24hrs after applied.
wet method apply (for large sticker or complicated design):
1) Clean the sticker application area to remove any grease or dust particles that may prevent the sticker from sticking to the surface,
2) Add a drop or two of dish soap to a quart of water in a spray bottle,in a cool area,out of the sun,lightly spray the area with the soapy water,
don't get it very wet or the sticker won't stick,
3) Then peel away the backing and apply the sticker with the transfer tape,the water will allow you to move or reposition the sticker if needed,
(when peeling the backing make sure the entire sticker are stick with the transfer tape,if not,stick back the tape and peel again until complete)
4) Once it is correctly positioned,using credit card or something similar squeeze out the water and bubble,towel dry,wait few hours for completely dry,
remove the transfer tape and you are done.
5) Don't wash the application area within 24hrs after applied.
here's the video tutorial for dry and wet apply:-
wet and dry apply sticker‏ - YouTube
- brand new item
- suitable apply for both indoor and outdoor
- vinyl type - ORACAL,3M,AVERY
- stickers color and size are editable
- sticker price start from RM4 onward
- payment can be made by maybank,public bank and CIMB
- post by pos laju or pos ekspress only (postage by buyer)
- discount will be given for bulk order
- available for custom made design,if low order quantity will charge for artwork fees
- artwork fees start RM5 onward,depend by the design difficulty
- do not hesitate to contact us via pm or phone if you have any further questions
- we will not be responsible for any damages or losses occurred during the delivery
- please click album below for individual stickers viewing (album will keep updated)
Pictures by stickersnation - Photobucket <-- click here
car body decals and mixed designs pictures by stickersnation - Photobucket <-- click here
https://www.facebook.com/pages/vector-art-stickers/273466079361059 <-- facebook click here
Contact info:-
- hp - 016-7028669 (sms or call)
how to apply sticker:-
dry method apply (for small sticker or simple design):
1) Clean the sticker application area to remove any grease or dust particles that may prevent the sticker from sticking to the surface,
2) Make sure the apply area surface are dry and clean,then peel away the backing and apply the sticker with the transfer tape,
(when peeling the backing make sure the entire sticker are stick with the transfer tape,if not,stick back the tape and peel again until complete)
3) Once it is correctly positioned,using credit card or something similar to squeeze out the trapped air,remove the transfer tape and you are done,
4) Don't wash the application area within 24hrs after applied.
wet method apply (for large sticker or complicated design):
1) Clean the sticker application area to remove any grease or dust particles that may prevent the sticker from sticking to the surface,
2) Add a drop or two of dish soap to a quart of water in a spray bottle,in a cool area,out of the sun,lightly spray the area with the soapy water,
don't get it very wet or the sticker won't stick,
3) Then peel away the backing and apply the sticker with the transfer tape,the water will allow you to move or reposition the sticker if needed,
(when peeling the backing make sure the entire sticker are stick with the transfer tape,if not,stick back the tape and peel again until complete)
4) Once it is correctly positioned,using credit card or something similar squeeze out the water and bubble,towel dry,wait few hours for completely dry,
remove the transfer tape and you are done.
5) Don't wash the application area within 24hrs after applied.
here's the video tutorial for dry and wet apply:-
wet and dry apply sticker‏ - YouTube
Attachments
-
119.3 KB Views: 1,571
-
113.5 KB Views: 11,896
-
87.2 KB Views: 811
Last edited: