Superior Sound And Noise Dampening Products

[sanlee]

Full range of superior automotive Noise and Vibration supression products.
Visit http://www.soundblok.com/

very competitive prices only from me... [email protected]

Acoustic Damping Mat's (34" X 48") RM120

Promat-5 (4pcs 24" X 32") RM450 (dynamat eq.)

Supression Pads (10pcs) very effective RM45

NanoBlok (latest nano-technology odor & bacterial photocatalytic coating protection to your vehicle) RM18.50

 

[huakenny]

1.SoundBlok Dampening Spray

how much and one car normaly need how many cans? can DIY?

2.Nano block....i need lowest price..

PM me...ASAP

 

[sanlee]

Thank You for your interest in my product but sorry huakenny...I don't have the full range of soundblok products.
Listed are bought in huge quantity (over stocked) and now selling at very low price. Dumping off over the net to recover capital..

As for the nanoblok, can be negotiate depending on quantity loh...

 

[huakenny]

Thank You for your interest in my product but sorry huakenny...I don't have the full range of soundblok products.
Listed are bought in huge quantity (over stocked) and now selling at very low price. Dumping off over the net to recover capital..

As for the nanoblok, can be negotiate depending on quantity loh...

so one kenari need how many can?

and one subaru impreza need how many can?

can i do this myself?

quote for me...PM me...

 

[khguan]

i have used de suppresion pads from soundblok bought a few year ago on my doors... nice stuff...

do u have anything dat is similar to dynamatt extreme?? price n size??

 

[sanlee]

The Flexmat is equivalent to Dynamat Extreme but it's twice the thickness of Dynamat Extreme.
I don't really carry much of this. But have some in stock.
Dumping off price (8" X 36") RM60

 

[nuggyn]

Full range of superior automotive Noise and Vibration supression products.
Visit http://www.soundblok.com/

very competitive prices only from me... [email protected]

Acoustic Damping Mat's (34" X 48") RM120

Promat-5 (4pcs 24" X 32") RM450 (dynamat eq.)

Supression Pads (10pcs) very effective RM45

NanoBlok (latest nano-technology odor & bacterial photocatalytic coating protection to your vehicle) RM18.50

the supression pads....10 pieces for RM45?? are these bitumen pads? how thick?

 

[sanlee]

the supression pads....10 pieces for RM45?? are these bitumen pads? how thick?

3mm thickness same as Wurth type

 

[nuggyn]

3mm thickness same as Wurth type

RM45 for 10 pieces? or RM45 each?

 

[sanlee]

RM45 for 10 pieces? or RM45 each?

sorry mate....It's RM45 for 10pcs....normal price RM60..cheers

 

[sanlee]

Price quoted are cheapest in town for real acoustic products ...Limited stock only...Lelong-lelong....

 

[sentinal3_16]

Are supression pads material is bitumen?Im looking for something which is not bitumen.

 

[sanlee]

SoundBlok Noise & Vibration Suppression Pad is a self-adhering vibration & resonance defeating material that is applied onto a vehicle’s door, roof, fender & rear quarter panel to suppress structural, engine & road borne vibrations. The convenient hand sized pads are ready to use with one surface coated with pressure sensitive adhesive that can be applied onto any panel, resulting in a good degree of noise and vibration control in a vehicle. It can also be added-on to bolster dampening points in the passenger compartment where the original melting sheets are too sparingly applied or are omitted altogether. It is made from a plastomeric based compound that is reinforced internally by a polyester fabric and has a protective polyethylene top surface layer.

All details regarding product can be found here www.soundblok.com

 

[nuggyn]

SoundBlok Noise & Vibration Suppression Pad is a self-adhering vibration & resonance defeating material that is applied onto a vehicle’s door, roof, fender & rear quarter panel to suppress structural, engine & road borne vibrations. The convenient hand sized pads are ready to use with one surface coated with pressure sensitive adhesive that can be applied onto any panel, resulting in a good degree of noise and vibration control in a vehicle. It can also be added-on to bolster dampening points in the passenger compartment where the original melting sheets are too sparingly applied or are omitted altogether. It is made from a plastomeric based compound that is reinforced internally by a polyester fabric and has a protective polyethylene top surface layer.

All details regarding product can be found here www.soundblok.com

what's the size of the suppression pad? width and length?
thickeness?

 

[sanlee]

what's the size of the suppression pad? width and length?
thickeness?

It's 180mm X 90mm X 3mm.../pcs.

I have also the ProPads..200mm X 100mm X 5mm RM85 for 10pcs.

 

[sentinal3_16]

I have checked the website,seen the the propad and some other have maximum temperature of 80c only.Wont the temp on the car body can go beyond that on a very hot day?

What will happen if the temp goes beyond 80c.Will the pads melt or omit some harderous gas?

I have seen some good vibration damping products which go beyond 200 celcious.Do you have any products which has high temperature resistance.The parts in and near engine bay also can get bloody hot.

 

[sanlee]

I have checked the website,seen the the propad and some other have maximum temperature of 80c only.Wont the temp on the car body can go beyond that on a very hot day?

What will happen if the temp goes beyond 80c.Will the pads melt or omit some harderous gas?

I have seen some good vibration damping products which go beyond 200 celcious.Do you have any products which has high temperature resistance.The parts in and near engine bay also can get bloody hot.

Melting point is at 150C for the propad, ideal 'performance/operational' temperature for noise damping is between -30C to 80C. Car surface temperature will usually never exceed 65C on a hot day in Malaysia. Inside the engine compartment, we recommend only using Flexmat, which can handle extreme radiated heat (car will have to be on fire before any damage to material is possible)....Cheers...

 

[bridgestoneRE711]

sanlee ,
propads and supression pad ...
what is the difference and what is the use ?
mind to tell me ?
wheel arch there , which one to use ?

 

[kingway]

pls PM the dampening Spray price.thankss

 

[sanlee]

sanlee ,
propads and supression pad ...
what is the difference and what is the use ?
mind to tell me ?
wheel arch there , which one to use ?

SoundBlok ProPad is a versatile cold-bonding vibration and noise dampening composite pad that has very high noise reduction characteristics. It is designed to supersede the capabilities of our basic suppression pad and will bond easily on dimpled and/or uneven surfaces. It is made from a 5mm thick visco-elastomeric compound and is designed to significantly reduce panel borne sound vibrations. It is ideal for use on door and fender panels.