Hello Guest! Log in or Sign up for a full experience & ad-free!

Mohawk ms100.2 silver 200w rms 2 channel amplifier

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search
Status
Not open for further replies.
ICE -In Car Entertainment

Mohawk ms100.2 silver 200w rms 2 channel amplifier

jason1980

500 RPM
Senior Member
Joined
Dec 22, 2011
Messages
972
Points
518
Location
Kuala Lumpur


hi guys, i have one unit used MOHAWK MS100.2 SILVER 200W RMS 2 CHANNEL AMPLIFIER, not more then 4 months. Still under warranty From NTC/Warraty 1years. I use for smack 12inch subwoofer, pretty good enough. i need to let go just bcuz upgraded. I bought NEW at RM5++...
If interesting kindly contact Jason(012-3511911) SMS,PM or CALL for best price.
COD: Puchong,KL or Cheras.

Spec: * Power Output (Stereo): 100W RMS X 2
* Power Output (Mono) : 200W RMS X 1
* Signal To Noise Ratio > 90 dB
* THD & Noise < 0.05
* Speaker Impedance : 2 - 16 Ohms
* Frequency Response : 10 Hz - 20 kHz
* Input Sensitivity : 2 mV - 5V
* Low-Pass Frequency : 40 Hz - 150 Hz
* High-Pass Frequency : 40 Hz - 300 Hz
* Bass EQ : 0 - 18 dB @ 45 Hz
* Input Impedance : > 20k Ohm
* Fuse Size : 30A (2 X 15A)
* Dimension (MM) : 320L X 60H X 250W

 

Attachments

  • photo 1.JPG
    photo 1.JPG
    106.9 KB · Views: 3,730
  • Screen Shot 2012-03-02 at 1.12.34 AM.png
    Screen Shot 2012-03-02 at 1.12.34 AM.png
    458.9 KB · Views: 3,402
  • Screen Shot 2012-03-02 at 1.12.50 AM.png
    Screen Shot 2012-03-02 at 1.12.50 AM.png
    391.6 KB · Views: 3,330
  • Screen Shot 2012-03-02 at 1.13.19 AM.png
    Screen Shot 2012-03-02 at 1.13.19 AM.png
    447.1 KB · Views: 3,223
Status
Not open for further replies.

A Post Every 5 Mins

bro and sis in ZTH... currently downgrading from mivec turbo to mivec n/a and for daily drive.... plan to mod and get a powerful n/a too since i dun wan disappoint myself after driving the n/a form... i plan to have:

1.) rechip ecu

2.) afc neo for some adjustment and make my rpm till 10k

3.) final upgrade, jun stage 3 high cam

can i do this like this?? will i gain more power?? my mivec is already 1.8 .... pls comment and share with me what u guys think... TQ :burnout:

Online now

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom