L2 / L5 ecu mod- no Boost CUT

[E-Tech]

Q & A

btw wanna ask wad's the 5-button-safc for? is it an ECU? and wad's a piggyback? confused wit all this technical terms...


Hi bro..
1. For the component for boost cut, I will post it to you.
Pls email me your postal address. I'll send out to ASAP.
If you have read my write up, then you will know when to solder it to.
2. Injection cars all have ecu/ecm- electronic control unit/management.
This controls injector, timing, water temp, fan and link to all the sensors in the car.

piggy back- the term is original "to carry someone on your back"
- in car management system... "it ride/piggy back on the original ecu"
mean original ecu + SAFC...

3. 5 Button SAFC- the 2nd generation of analog Super Air Fuel Convertor made by Apexi
It is use to control- increase/reduce fuel in cars with fuel injector system...
After car is upgrade or ecu modified, fuel might be too much(rich) or too litte(lean), so these 5 Button SAFC (piggyback) can help do some basic adjustment at 5 fix rpm settings...

Hope this help....To learn more pls "search"... TQ

 

[Turboyaki]

i have DIY the component today..boost cut gone..now i can boost until 1.5bar..even more also can but needs a better management system,if not, scare the turbo/engine cannot hold on..haha

Thanks a lot to Bro E-Tech for helping me sort out this problem..Thanks Bro..

 

[E-Tech]

i have DIY the component today..boost cut gone..now i can boost until 1.5bar..even more also can but needs a better management system,if not, scare the turbo/engine cannot hold on..haha

Thanks a lot to Bro E-Tech for helping me sort out this problem..Thanks Bro..

Bro frm KK...
glad u like it and it works...
Btw, u owe me rm1 for da stamp to post to KK...

thanks and now u can help others...

 

[Turboyaki]

Bro frm Sarawak
glad u like it and it works...
Btw, u owe me rm1 for da stamp to post to Kuching...

thanks and now u can help others...

haha..actually i'm from Sabah la bro..Kota Kinabalu
honestly,i'm willing to pay you for more of this component..

 

[E-Tech]

Bro frm KK,
I have another spec I want you to test...
This will add more fuel after da original boost cut rpm...
Will you be willing to test since now is school/uni vacations?

BTW, how many L2 turbo-ing here and there in KK?
Tq

 

[ashez]

bro etech
i juz onli installed the stuff u sent..
it really workz!!!!!!!
cool man...
but engine kinda starting to tak cukup minyak at high boost....
now boosting at 1.0 bar....
thankz loadz man....
belanja u yum cha sometime if i get to jb.....

---------- Post added at 02:42 PM ---------- 6 hour anti-bump limit - Previous post was at 02:37 PM ----------

bro etech..kinda got some bad news the l5 which i was suposed to install met with an accident...
very sorry bro couldnt help u with the pics...
heard rumors from the workshop mebby this car total loss...

 

[E-Tech]

Bro..

At last you did it....psssssssssssssssit

L5 Car total loss? Wa sorry man to your friend/bro...
But ecu not "total" correct? Try to salvage it for me, then can get more free DIYs..

BTW I working on another spec, to ensure fuel sufficient till 1.2-1.3 bars...
Turboyaki will help me out on this... if better, i update your version too..

Anyway drive safely...

 

[Turboyaki]

Bro frm KK,
I have another spec I want you to test...
This will add more fuel after da original boost cut rpm...
Will you be willing to test since now is school/uni vacations?

BTW, how many L2 turbo-ing here and there in KK?
Tq

sure..what should i do for the spec?

in KK, there are reli alot of L2 turbo powered kancils..even my small kampung also packed with kancil turbo..plus,mostly the L2 here kinda rocks..all like to boost very high until 1.5 to 2.5bar:stupid:..dunno why...may be all have the racing spirit

 

[E-Tech]

sure..what should i do for the spec?

in KK, there are reli alot of L2 turbo powered kancils..even my small kampung also packed with kancil turbo..plus,mostly the L2 here kinda rocks..all like to boost very high until 1.5 to 2.5bar:stupid:..dunno why...may be all have the racing spirit

I will have to send you da new upgraded component.
Do the same soldeirng and then got test and later report back...
If good, the old component masuk ur friend's car lor...
U master mah, so MUST be in front.... hee hee hee

p/s: PM me your details again...for da posting of version2 component. Tq

 

[Turboyaki]

I will have to send you da new upgraded component.
Do the same soldeirng and then got test and later report back...
If good, the old component masuk ur friend's car lor...
U master mah, so MUST be in front.... hee hee hee

p/s: PM me your details again...for da posting of version2 component. Tq

you mean take out the old diode and replace the new component on the same spot?

Master sometime have to be low profile, jalan slow slow..cannot let people now i'm fast:proud:..haha

 

[ashez]

ok bro...no probz...will be waiting....
bro hope u can help me soon....kinda cant wait to test it

 

[E-Tech]

Roger n out

 

[E-Tech]

ok bro...no probz...will be waiting....
bro hope u can help me soon....kinda cant wait to test it

Bro
hv u tested da new specs component?
How?
Tq

 

[consonar]

wahh.. tis is good... care to share? emel me at [email protected] ...

 

[ashez]

bro juz recived it today...will do it tonite and let u know.....

 

[E-Tech]

wahh.. tis is good... care to share? emel me at [email protected] ...

Email to me your postal address if interested to test this.
And you engine set up.... Tq

---------- Post added at 07:58 AM ---------- 6 hour anti-bump limit - Previous post was at 07:56 AM ----------

wahh.. tis is good... care to share? emel me at [email protected] ...

Email to me your postal address if interested to test this and i will post it to you.
And plz mentionyour engine set up.... Tq

[email protected]

---------- Post added at 08:08 AM ---------- 6 hour anti-bump limit - Previous post was at 07:58 AM ----------

bro juz recived it today...will do it tonite and let u know.....

Rev1 vs Rev2.... which is better?.. boost cut have? Performance better?

 

[ashez]

bro feel like no diffrence la....still kinda da same

 

[E-Tech]

bro feel like no diffrence la....still kinda da same

Bro...
In that case, it is good news.
What was your boost setting? 1.0b, 1.1b or 1.2b..., forgot to tell you, the different
will be after the normal or std boost cut level....

 

[ashez]

i set boost at 1.0

 

[E-Tech]

i set boost at 1.0

Ok. In that case will not notice da improvement.
Anyway, it is confirmed to be better.
So rev2 is best as of now.
Tq.
I hv also send out 1 today to some guy interested.
And got rm20 starbuck coffee