GReddy Profec B-Spec II Boost Controller + Remote Switch Button

Status
Not open for further replies.
Engine and Performance

GReddy Profec B-Spec II Boost Controller + Remote Switch Button

facegreen

Beyond 20,000 RPM!
Senior Member
Mar 10, 2006
23,305
40
1,648
GReddy Profec B-Spec II Boost Controller + Remote Switching Button

GReddy Profec B-spec II
The GReddy PRofec B-spec. is one of the simplest, easy to use electronic boost controllers on the market today. Available in either Black or Clear Blue cases, the PRofec B-spec uses a reliable twin-solenoid valve control motor. There are two presets labeled Lo. and Hi., as well as a Balance knob to alter the wastegate boost response. This unit also can be used with both integral/actuator or external/poppet style wastegates good for twin and sequential turbo setups. Compatible with the GReddy Remote Switching System.

GReddy Remote Switching System
GReddy Remote Switching System allows the user hands-free modulation between high boost and low boost settings on either of our PRofec boost controllers. It can also be used as a momentary switch for nitrous, line lock, etc. Use our optional voltage adapters to wire it up for these features.

GReddy Profec B spec II Part # 15500209
GReddy Remote Switching Part # 15500351

Black head unit
Electronic boost controller
Built in Boost gauge (kPA or PSI)
2 preset setting
(Lo. & Hi.) Set % - to increase boost
Gain % - wastegate response adjustment
Start Boost - inital boost response adjustment
Warning point, warning limiter, peak-hold/Last boost
Compatiable with Remote Switching System (to swich from Lo. to Hi)


Selling Price: RM1xxx



Interested please contact us @
We are re-located our New Showroom, Currently COD & Pick up is available @ POWER AUTOHAUZ
016-997 3300 (JC)
019-389 1881 (MATT)
Dealers are Most welcome!!! Price can be alot lower for Quantity purchase!
Please visit our website : Hanzo Racing Malaysia

Please Visit Our Garage online : Clearance SALE!!!
 

Attachments

Status
Not open for further replies.

Random Post Every 5 Minutes

Hello,
My name is Colm,im from ireland,im doing a swap soon putting a 1j into an altezza,i was wondering have many people on this site done the swap and what kinda troubles am i up against,also where would i get wiring digrams for both the mark2 jzx100 that the 1j is in and also the sxe10 altezza which has a 3sge beams in so i can match the wiring looms,any help would be greatly appreciated lads thanks:adore:
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience