B14 owner club!!

[SentraGTS]

north - i think it save a bit fuel when u r in low rev. high rev sure makan fuel la..

wong - my car also send to fix this week. so my car also coming out next week. i going to fix on the rear 2 pot disc brake. already done the grill.
i need 5 days to fix and spray color on both front and rear caliper.
then final job for my car..

 

[Northiswara]

sentragts,
save a bit fuel only? got 10%?
bring wong sifu go with u. then he will also send his B14 to transplant sr20det too.

 

[Tohsan]

North

is the N16 QG16 and N16 QG18 differences oni in the horsepower?

 

[Northiswara]

tohsan,
long time no hear from u. very busy with tan family kah?

QG16 and QG18 a lot different if u dismantle the engine.
well from the paper u can see difference in HP and torque lor.
both use difference piston lor. crankshaft pun different.
plug maybe use same one.
the rest i really dont know which part both of the engine is kongsi use liao.
FC for both is almost the same lar. better get 18 cozs more torque, the engine no need to pull the car like a buffalo.

but latio engine and sentra engine is totally different.

why suddenly ask this Q bro?

 

[SoYouThinkYouCanDrive]

Anyway, I test drove a Latio and Livina 2 weeks ago.....

Latio, 1600cc, a go-kart-around-the-city engine pulling power quite impressive.

Livina, 1800cc, interior look damn nice, like a mini-size-luxurious-estima, but pulling power not too impressive, chassis heavy, a good comfort car though....

Both is nearly 100k, difference between both in price is not much....worth the buy :D

hehehehe

NISSAN RULES ! Nothing pulls like NISSAN !

 

[Tohsan]

tohsan,
long time no hear from u. very busy with tan family kah?

QG16 and QG18 a lot different if u dismantle the engine.
well from the paper u can see difference in HP and torque lor.
both use difference piston lor. crankshaft pun different.
plug maybe use same one.
the rest i really dont know which part both of the engine is kongsi use liao.
FC for both is almost the same lar. better get 18 cozs more torque, the engine no need to pull the car like a buffalo.

but latio engine and sentra engine is totally different.

why suddenly ask this Q bro?

hello North,

biasala, always busy with my side of work. My boss is quite busy with his new business,so the existing business he leave the whole thing for me to take care. haih! si beh busy.

About the question becos some friend ask me whether they can just swap the piston thing from QG18 to QG16 so that they can have that few extra hp, so i think in term of engine wise it won't be that straight forward,sure involve a lot of technical stuffs. Since i now nut about engine stuff thats why have to ask expert like you to find outloh.

 

[Tohsan]

Anyway, I test drove a Latio and Livina 2 weeks ago.....

Latio, 1600cc, a go-kart-around-the-city engine pulling power quite impressive.

Livina, 1800cc, interior look damn nice, like a mini-size-luxurious-estima, but pulling power not too impressive, chassis heavy, a good comfort car though....

Both is nearly 100k, difference between both in price is not much....worth the buy :D

hehehehe

NISSAN RULES ! Nothing pulls like NISSAN !

ya Latio is a nice car to drive, I miss the boat already. Just have to be happy with my N16 what to do. Actually i prefer my N16 more than my BMW 5 series becos N16 don't have the smelly cow leather smell

 

[SoYouThinkYouCanDrive]

hahahahahahaha

 

[Northiswara]

tohsan,

QG16DE
Bore X Stroke = 76mm x 88mm

QG18DE
Bore X stroke = 80mm X 88mm

both engine has same stroke but different bore. so 1.8 piston canot fit into 1.6 unless u rebore the 1.6 block which is not recommended. for each cylinder u need to rebore 4mm. this will make the cylinder wall thinner. and not sure how safe it is lar cozs i dont know what is the length in MM between each cylinder. normally people only rebore 0.5mm. hehe........ so there is a huge difference. in some case i do heard that the honda B16 and B18 engine can be rebore more than 1-2MM and hantam in stroker kits to enlarge the cc by a lot. but that is different engine lar.
as for the crankshaft, not so sure if 1.6 and 1.8 are using the same crankshaft. and as for the camshalf and valve, i bet 1.6 and 1.8 are not sharing the same thing. so in another word if it is possible to hantam in 1.8 piston into the 1.6 block u need a lot $$ lar. the piston maybe cheap, says few hundred for a set but the rest of the things/works is not cheap. might as well u hantam in QG18DE engine then go jpj register, sure can pass one lar, only 200cc difference. less headache also.
ask ur fren install sr16ve saja lar. easy kautin. more powerful than QG18DE. if not syok with sr16ve then hantam in sr20DET saja lar. haha..................
if not syok with sr20det then ask ur fren buy silvia S15 or GTR lar. sure syok. haha.................
u can sell ur fren a S15, 350z or GTR then u earn some commision from Tan family. hehe....................

u know sometimes it is cheaper to transplant a engine than overhaul/repair the existing engine. afterall for my b14, u can get a halfcut for my engine with gb for rm2.5k. if repair piece by piece the bill might shoot to rm5k.

 

[Northiswara]

Anyway, I test drove a Latio and Livina 2 weeks ago.....

Latio, 1600cc, a go-kart-around-the-city engine pulling power quite impressive.

Livina, 1800cc, interior look damn nice, like a mini-size-luxurious-estima, but pulling power not too impressive, chassis heavy, a good comfort car though....

Both is nearly 100k, difference between both in price is not much....worth the buy :D

hehehehe

NISSAN RULES ! Nothing pulls like NISSAN !

yeah the latio got the pulling power better than vios.
ribenna i hvnt try yet. i always pronounce as ribenna. haha..........

 

[Northiswara]

tohsan,
here is some tips for QG engine. hope it helps u.

QG18DE Tuning Guide and MODS list - NissanForums.com

 

[SoYouThinkYouCanDrive]

lol...............i love ribena.....looooooool

 

[Tohsan]

North

walau eh so kau lan complicated ka just to increase a few horse,then i ask him just stay with his N16 until he have more money upgrade to R35 saloon since he value "quietness interior" highly. So those recommendation for turbo transplant no need to ask him to considerloh.

btw what sport rims are you guys using now? My car is black metallic i m still thinking about getting my old skool favourite original CE28 gold color for 16 inch or maybe 17 inch but the prices make me hesitate a bit.

 

[SoYouThinkYouCanDrive]

Mine is enkei 15" black matte color....looks boring but one the lightest rim avaible....hehe hehe

 

[SentraGTS]

wong - i think my car will come out next thursday or friday caz the rear disc break need lot time to modify la.. so sien no car for me to drive in this weekend..

 

[SoYouThinkYouCanDrive]

aiya, u can drive other car come out too.....I think i'll drive my old junk too, my car need another 1 week :(

 

[sentrakit]

waa...long time never come in d..
a lot been hapening here....
been very busy wit work lately..

 

[Northiswara]

enkei rim good. i using JRD lousy rim. 15 inch.

 

[Tohsan]

North

u better than me i m using lanciao JRD 14 stock rims now, so kau lan ugly!

 

[Northiswara]

tohsan,

u using nissan JRD 14" rim better than mine. i using pure JRD rim. i heard JRD build the rims for nissan got quality one larr. if u buy pure JRD teruk lorr.
i bought a 2nd hand rim lagi lang cozs got scratch here and there. haha. bought it cheap cheap. cozs no $$ marr.