AFC Neo - Screen Change Automatically

driver_crx

Junior Member
Senior Member
Sep 23, 2008
5
0
1,501
I'm using AFC Neo in my b16a for a few months with good response. Just recently i found the screen was change automatically and all the button was not function. Even it also not response to ECU. it look like demo set.
Send back to dealer at sunway also cannot help. Any experts here?
 

ftzone

full throttle zone
Senior Member
Feb 21, 2005
5,339
141
3,163
Penang, Prai
www.ftzoneracing.com
recheck your wiring... bad ground may be a possible cause. if all wiring is confirmed ok.. your safc neo is possibly fried, although is rare...
 

pencalat

500 RPM
Senior Member
Nov 20, 2006
805
19
1,518
JB
i do think so... i've used neo b4... but it doesn't happen..
 

ajakV6

Known Member
Senior Member
Jan 20, 2006
79
0
1,506
Hi all,

Just share the info... found it in internet also.
source http://www.srtforums.com/forums/f87/afc-neo-key-operation-disabled-551647/

i face same problem with my safc neo. now it solve.

Solution:
1. Turn off the power to your NEO.(turn off your car)
2. Hold the left, bottom, and right button (known as the U) and power your car on
3. It should go back to the menu of demo, self test, and clear eeprom.
4. Toggle to clear eeprom and turn your car off.
5. Turn you car back on and you should be back to the main menu.
 

Random Post Every 5 Minutes

Would like to convert my old vitara (92' model) to turbo engine.
Need helps on type of turbo engine than can be transplant with minimum mod on engine mounting. Any experience?

Used to saw a 2 door Vitara with a big IC in front. Don't no what type of engine...CA18det,....AE86,....????
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience